Specifications

Chapter 1 Introduction Optimux-XLT1 Installation and Operation Manual
1-10 Technical Specifications
1.4 Technical Specifications
Link Interfaces
Fiber Optic Link
Applicable Standard
ITU-T Rec. G.955
Line Code
CDP
Performance
Refer to Table 1-1
Connectors
ST, SC, FC/PC
Redundancy
Additional link is optional
Channel Interfaces
Ethernet Ports
Physical Interface
10BaseT, 10/100BaseT
Channel Slots
(Ports)
• Fixed: A (one 10BaseT)
• Interchangeable with FETH/HS/T1: B, C
and D (three)
Data Rate
• 10 Mbps for 10BaseT interface
• 10/100 Mbps for 10/100BaseT interface
Transmission Mode
Full/half-duplex or auto negotiation
enable/disable selectable on Ethernet
channel module
Bridge Parameters
• Data transfer rate: 6.639 Mbps maximum
• No. of Supported Addresses:

10,000 for 10BaseT

16,000 for 10/100BaseT
• Connector: RJ-45
T1 Interface
Electrical Interface
According to ITU-T Rec. G.703
Jitter
According to ITU-T Rec. G.824
Data Rate
1.544 Mbps
Line Code
B8ZS or AMI
Range
According to ITU-T G.703
Slots (Ports)
B, C and D interchangeable with three
FETH/HS Ethernet ports
Order from: Cutter Networks
Ph:727-398-5252/Fax:[phone]
www.bestdatasource.com