Specifications

Optimux-XLT1 Installation and Operation Manual Chapter 1 Introduction
Technical Specifications 1-11
Port Type
Balanced (100Ω)
No. of channels
per slot
2 or 4
Maximum no.
of channels per
unit
12
Connector
RJ-45
High Speed Interfaces
Physical Interface
V.35, RS-530 or X.21
Data Rate
1.544 Mbps
Slots/Ports
B, C and D (interchangeable)
Timing
Internal, external and loopback
Number of
Channels
4
Connector
SCSI 26-pin (with adapter cable)
Control Signals
RTS, CTS, DTR, DSR and DCD
Power
Number of Supplies
One or two (power sharing)
AC Power
90 VAC to 260 VAC, 47 Hz to 63 Hz
DC Power
• -48 VDC: -36 VDC to -72 VDC
• 24 VDC: 24 VDC ±10%
Source Power
Consumption
40 Watt maximum (from one or two
supplies)
Unit Indications and
Alarms
Unit Indications
See Table 3-1
Dry Contacts
• Maximum Ratings: 1A, 60 VDC, 30 VAC
• Major alarm: Power is OFF, in redundant
power supply: One power supply is
faulty, E3 signal loss of frame, T1 loss of
signal
• Minor alarm: AIS on T1 input line, AIS on
link input
• Connector: 9-pin D-type female
Order from: Cutter Networks
Ph:727-398-5252/Fax:[phone]
www.bestdatasource.com