Specifications

Chapter 4 Supervisory Port Software Configuration Optimux-XLT1 Installation and Operation Manual

4-2 Accessing and Exiting the Supervisory Terminal

MAIN MENU

RAD Data Communications Ltd.

OPTIMUX - XLT1

*****************************************

SW version 4.0

HW Revision H

1. Local device

2. Remote device

Enter your choice:

7. Type 1 for the Local Device menu or 2 for the Remote Device menu.

The Optimux-XLT1 Local Device or Remote Device screen appears.

All the following screens for the Local Device and the Remote Device are the same,

except Download, SNMP and parts of the interface configuration screens, which are

not available for the Remote Device.

The top left corner of each screen indicates the screen that applies to a Local

Device or a Remote Device.

When working with the remote device, all changes take affect within 120 seconds.

LOCAL DEVICE

LOCAL OPTIMUX MENU

------------------

0. Exit

1. Device Information

2. Interface

3. Software Download (not available in Telnet)

4. SNMP Parameters

5. Reset

6. Change password

Enter your choice:

➤ To exit the supervisory terminal:

Type 0 or press ESC in any menu screen and in any subsequent screen that may

appear.

Note

Order from: Cutter Networks

Ph:727-398-5252/Fax:727-397-9610