Specifications

Chapter 4 Supervisory Port Software Configuration Optimux-XLT1 Installation and Operation Manual
4-4 The Optimux-XLT1 Device Information
4.4 The Optimux-XLT1 Device Information
➤ To access the device information:
Type 1 in the Optimux-XLT1 Local Device screen.
The Device Information Menu screen appears.
LOCAL DEVICE
DEVICE INFORMATION MENU
-----------------------
0. Exit
1. General Information
2. Status
3. Change Link Redundancy Status
4. Change Clock Source
Enter your choice:
Viewing the Optimux-XLT1 Versions
➤ To view the hardware and software revisions:
Type 1 in the Device Information Menu.
The General Information screen appears.
LOCAL DEVICE
GENERAL INFORMATION
-------------------
Hardware revision H
Software version SW Version 4.0
Management channel Through module A
0. Exit
Enter your choice:
The Management channel shows one of the following states:
Through module A indicates MNG-ETH port is set to Port A.
Separate port (back panel) indicates MNG-ETH port is set to Separate.
Order from: Cutter Networks
Ph:727-398-5252/Fax:[phone]
www.bestdatasource.com