Specifications

Chapter 4 Supervisory Port Software Configuration Optimux-XLT1 Installation and Operation Manual

4-12 The Optimux-XLT1 Interface

13. Type 2 to set the back pressure.

The Change Interface Configuration screen changes and appears as follows:

LOCAL DEVICE

CHANGE INTERFACE CONFIGURATION

------------------------------

NOTE: To change the configuration of the interface, select it

in the next format:

- decimal number from 1 to 5 for modules,

(1 for module A, 2 for module B,..., 5 for E3 link)

0. Exit

1. Module module B

2. Back Pressure Disable

3. Half/Full duplex N/A

4. Auto-negotiation Enable

5. Multicast blocking Disable

6. Broadcast blocking Disable

7. Speed N/A

8. Reset

Choose 1–for ‘Back pressure Enable’ 2–for ‘Back pressure Disable’,

ESC to cancel

14. Type 1 to enable back pressure or 2 to disable back pressure.

Order from: Cutter Networks

Ph:727-398-5252/Fax:727-397-9610