Specifications

Optimux-XLT1 Installation and Operation Manual Chapter 4 Supervisory Port Software Configuration

The Optimux-XLT1 SNMP Parameters 4-23

4.7 The Optimux-XLT1 SNMP Parameters

➤ To modify the SNMP parameters:

Type 4 in the Optimux-XLT1 Local Device screen.

The SNMP Parameters screen appears

LOCAL DEVICE

SNMP PARAMETERS

---------------

0. Exit

1. IP addresses

2. Community names

3. Permanent managers

Enter your choice:

The SNMP Parameters Menu is not available for the Remote Device.

Viewing IP Addresses

➤ To view the IP addresses:

1. Type 1 in the SNMP Parameters screen.

The IP Addresses screen appears.

LOCAL DEVICE

IP ADDRESSES

------------

NOTES: 1. IP address should be typed in the following format: X.X.X.X

where: X- decimal number from 0 to 255.

2. Non-contiguous subnet masks are not allowed.

3. Change will take effect after RESET only.

0. Exit.

1. Inband IP address: 192.115.244.135

2. Subnet mask: 255.255.255.192

3. Default Gateway: 192.115.244.129

Enter your choice:

Order from: Cutter Networks

Ph:727-398-5252/Fax:727-397-9610