Specifications

Chapter 4 Supervisory Port Software Configuration Optimux-XLT1 Installation and Operation Manual
4-26 Setting the Telnet Password
4.8 The Optimux-XLT1 Reset
➤ To restart the system:
Type 5 in the Optimux-XLT1 Local Device screen.
The Restart Menu screen appears.
LOCAL DEVICE
RESTART MENU
------------
0. Exit
1. Restart system
Enter your choice:
The Restart Menu is not available for the Remote Device.
4.9 Setting the Telnet Password
➤ To set the Telnet password
1. Type 6 in the Optimux-XLT1 Local Device screen.
The Password Management screen appears.
PASSWORD MANAGEMENT
0. Exit
1. Set new monitor password
Enter your choice :
2. Type 1 to set the password.
3. Type the manager password, “optimux1” (not case sensitive).
4. Type the new password.
5. Verify the new password by retyping the password.
The password has now been set and saved. Connection to Telnet can be
established by using this password.
The manager password is always valid in terminal connection but, it cannot be used
to connect to Telnet.
Note
Order from: Cutter Networks
Ph:727-398-5252/Fax:[phone]
www.bestdatasource.com