System information

User’s Manual Chapter 2 Installation and Operation
Optimux-34 Ver. 2.81 Using the Graphical User Interface (GUI) 2-7
Figure 2-12. MNG-ETH/USER-ETH Pop-Up Menu Map
Selecting the System
Before you can perform system operations, you must first select the system in
the Optimux-34 View window.
Two types of elements may be selected:
• Ports
• Links
• All other areas that are not ports represent the system and a frame around
the panel is displayed.
The default selection is the system.
 To select the system:
• Click inside the Optimux-34 View window without selecting a device. Ensure
that no border surrounds any of the port or modem cards in the window.
A blue border outlines both the Local and Remote Optimux-34 devices,
indicating that the whole system is selected.
Figure 2-13. Optimux-34 System Selected in the View Window
The main view includes the local device and the remote device.
Discovering the Device
The Optimux-34 application opens with a specific IP address. The NMS discovers
the device by:
• Recognizing the IP address it was designated
• Identifying the virtual modules, slots, and LEDs that exist
• Determines which device is the Remote device.