System information

User’s Manual Chapter 3 Configuration Management
Optimux-34 Ver. 2.81 Configuring Optimux-34 for Network Management 3-3
Parameter Possible Values / Remarks
System Up Time The length of time the system has been running.
Format: d: days, hh:mm:ss
Read-Only
Default Gateway The IP address of the default gateway
Read-Only
Number of Interfaces The number of network interfaces present in the system.
Read-Only
The System Information Name, Contact, and Location dialog box fields are
enabled, regardless whether there is communication with the agent.
Configuring System Parameters
RADview/TDM allows you to view and configure the system parameters of both
the local and the remote devices.
 To view and configure general Optimux-34 system parameters:
1. In the Optimux-34 View window, select the system (as described in
Selecting
the System
in Chapter 2 ).
2. On the menu bar, click Configuration > System.
The System Parameters dialog box appears. It contains configuration
parameters for local and remote devices. The System Parameters dialog
box is divided into two columns: the first column shows the local device
and the second column shows the remote device. The parameter names
are common to both columns.
Note