System information

Chapter 3 Configuration Management User’s Manual
3-6 Configuring Operational Parameters Optimux-34 Ver. 2.81
 E3 Link port parameters
 MNG-ETH port parameters
 USER-ETH port parameters.
Additional port operations are discussed in the following chapters:
• Managing port faults (see Managing Port Alarms in Chapter 7).
• Monitoring port performance and diagnostics (see Performance Monitoring in
Chapter 6 ).
Viewing and Configuring Port Parameters
RADview/TDM allows you to view and modify Optimux-34 E1, E3 Link, and
Ethernet port parameters.
The Configuration menu provides port level configuration information.
Figure 3-4. Port Level Configuration Menu
Viewing and Configuring Ethernet Port Parameters
You can view and configure Ethernet port parameters.
The USER-ETH port is enabled only per valid license key.
 To view and modify Ethernet port parameters:
1. In the Optimux-34 View window, select an Ethernet port (MNG-ETH or
USER-ETH) on the local or remote device.
2. On the menu bar, click Configuration > System Parameters.
Note