System information
Chapter 3 Configuration Management User’s Manual
3-16 Additional Tasks Optimux-34 Ver. 2.81
Resetting the System Hardware
RADview/TDM allows you to reset the Optimux-34 hardware configuration.
Resetting the system hardware resets the Agent.
To reset hardware configuration:
1. In the Optimux-34 View window, select the system (as described in
Selecting
the System
in
Chapter 2
).
Figure 3-11. System Level Configuration > Reset Menu
2. On the menu bar, click Configuration > Reset > Reset HW.
A confirmation dialog box is displayed.
Selecting this entry will enable the user to reset the agent’s hardware.
Figure 3-12. Reset Agent Confirmation Message Dialog Box
3. Click <OK> to reset.
Resetting System Configuration
RADview/TDM allows you to reset the Optimux-34 parameters to default values.
To reset hardware configuration:
1. In the Optimux-34 View window, select the system (as described in
Selecting
the System
in
Chapter 2
).
2. On the menu bar, click Configuration > Reset > Reset Config.
A confirmation message appears.
Selecting this entry will enable you to reset the agent's configuration to
its default values.