Manualshelf

System information

ManualsBrandsRAD Data comm ManualsComputer equipmentOptimux-34
31323334353637383940
Chapter 4 Configuring Typical Applications User’s Manual
4-2 Configuring Optimux-34 Optimux-34 Ver. 2.81
E1 Fan-Out over Satellite Link Application
An E1 fan-out over satellite link application shown in
Figure 4-2
is a satellite link
connecting two Optimux-34 units. The Optimux-34 unit can be connected to a
Megaplex-2100 unit and a network management service (NMS). A coax link
module is installed in each of the Optimux-34 unit that is physically close to the
satellite device.
Figure 4-2. E1 Fan-Out over Satellite Link Application
4.2 Configuring Optimux-34
You can use the following procedures to configure Optimux-34.
Configuring System Information
You can configure system information.
To configure system information:
1. In the Optimux-34 View window, select the system.
2. On the menu bar, click Configuration > System Info (see
Figure 3-1
).