Manualshelf

System information

ManualsBrandsRAD Data comm ManualsComputer equipmentOptimux-34
41424344454647484950
User’s Manual Chapter 4 Configuring Typical Applications
Optimux-34 Ver. 2.81 Connecting Optimux-34 to the Management Station 4-7
Management Access
To enable/disable Telnet and Web management accesses:
1. On the menu bar, click Options > Management Access (see
Figure 3-4
).
Figure 4-6. Management Access Dialog Box
2. Select Enable or Disable for Telnet Access, as required.
3. Select Enable or Disable for Web Access, as required.
4. Click <Set> to implement the change(s).
4.3 Connecting Optimux-34 to the Management
Station
You can perform the following parameters to connect Optimux-34 to the
management station.
Configuring Port Parameters
You can configure Optimux-34 port parameters.
To configure port parameters:
1. In the Optimux-34 View window, select an E1 (Ports 1-16), E3 Link (A or B)),
or MNG-ETH, or USER-ETH port from either the local or remote unit.
2. On the menu bar, click Configuration > Parameters (see
Figure 3-7
).