System information

Chapter 4 Configuring Typical Applications User’s Manual
4-10 Connecting Optimux-34 to the Management Station Optimux-34 Ver. 2.81
•
The USER-ETH port is available/enabled only per valid license. If the USER-ETH
port has been configured to a rate > 0, the corresponding E1 ports fields will be
all Read-Only, and the <Set> button will be disabled.
Configuring V.35 Port Parameters
You can view and configure parameters for V.35 ports.
 To view and configure V.35 port parameters:
1. In the Optimux-34 View window, select a V.35 port on the local or remote
device.
2. On the menu bar, click Configuration > Parameters.
Figure 4-8. V.35 Port Parameters Dialog Box
3. Fill in the fields, as described in Table 4-4 .
4. Click <Set> to implement the changes.
Note