System information

User’s Manual Chapter 4 Configuring Typical Applications
Optimux-34 Ver. 2.81 Connecting Optimux-34 to the Management Station 4-11
Table 4-4. V.35 Port Parameters
Parameter Possible Values / Remarks
Administrative Status Up, Down
Port status
Selecting Down disables the remaining fields in this dialog box and any changed
values of RW fields will not be sent the agent
Port Type V.35
Read-Only
User Name V.35 port name, up to 15 characters
Connector Type DB25
Read-Only
Clock Source LBT (Default)
Internal
External
CTS ON (Default)
RTS
DCD Link OK
ON
Enable DTW Loop No (Default
Yes
Configuring E1 Channel Port Parameters
You can view and configure parameters for the E1 channels.
 To view and configure E1 port parameters:
1. In the Optimux-34 View window, select an E1 channel port (ports 1-16 from
either the local or remote unit).
2. On the menu bar, click Configuration > Parameters.