System information

User’s Manual Chapter 4 Configuring Typical Applications
Optimux-34 Ver. 2.81 Configuration Sequence 4-15
Resetting the System Hardware
RADview/TDM allows you to reset the Optimux-34 hardware configuration.
Resetting the system hardware resets the Agent.
 To reset hardware:
1. In the Optimux-34 View window, select the system.
2. On the menu bar, click Configuration > Reset > Reset HW.
3. Click <OK> to reset the agent's hardware.
Resetting System Configuration
RADview/TDM allows you to reset the Optimux-34 hardware configuration.
Resetting the system hardware resets the Agent.
 To reset system configuration:
1. In the Optimux-34 View window, select the system.
2. On the menu bar, click Configuration > Reset > Reset Config.
3. Click <OK> to reset the agent's configuration to its default values.
4.5 Configuration Sequence
The following describes the step-by-step configuration sequence for the
Optimux-34 local and remote units through the RADview/TDM Optimux-34.
Table 4-7. RADview/TDM Optimux-34 Configuration Sequence
Task Description System Level Port Level
(MNG-ETH,
USER-ETH, V.35,
E1, Link)
Configuring and viewing system information
√
Configuring and viewing system parameters
√
Configuring and viewing port parameters
√
Viewing system interfaces
√
Defining manager list
√
Setting management access
√
Polling agent
√
Managing alarms
√
Listing alarm history log
√
Clearing alarm history log
√