System information

Chapter 7 Fault Management User’s Manual
7-6 Handling Alarms and Traps Optimux-34 Ver. 2.81
Table 7-4. System Alarm Parameters
Parameter Possible Values / Remarks
Location Indicates the location where the alarm occurred
Local
Remote
Read-Only
Code The code for the specific alarm
1…40
Read-Only
Description The description of the alarm corresponding to the specified code
Read-Only
Severity The alarm severity
Major
Minor
Read-Only
Mask Masks system alarms
Yes
No
Viewing Alarm History in the System Alarm Buffer
RADview/TDM Optimux-34 allows you to view a history log of all the alarms listed
in the Optimux-34 System Alarm Buffer. The System Alarm Buffer contains all the
unmasked alarms recorded for the whole device.
 To view the System Alarm Buffer List:
1. In the Optimux-34 window, select the system.
2. One the menu bar, click Fault > History Log > List.