- RAD Data Communications Network Router User Manual
Table Of Contents
- Front Matter
- Quick Start Guide
- Contents
- Chapter 1 Introduction
- Chapter 2 Installation and Setup
- Chapter 3 Operation
- Chapter 4 Configuration
- Chapter 5 Setup Menu
- Chapter 6 Troubleshooting and Diagnostics
- Appendix A Interface Specifications and Cable Diagrams
- Appendix B Boot Manager
- Appendix C SNMP Management
- Appendix D Glossary
- DC Power Supply Connection
- Customer Response Form
FCD-IPM Installation and Operation Manual Chapter 5 Setup Menu
WAN Economy Menu 5-95
INTERNET
The connection is manual
Connection is terminated if
no frame passes within 30
seconds
Modem
FCD-IPM
Figure 5-95. Manual Connection
Spoofing
IP/IPX SPOOFING ( Device name – FCD-IPM )
---------------
Keep Alive (IPX)
----------------
1. Keep Alive mode: [Disabled]
RIP / SAP spoofing (IP/IPX)
---------------------------
2. RIP/SAP spoofing tables updated timeout (minutes): 30
3. Change link spoofing mode
Link 1 spoofing mode: Disabled
Link 2 spoofing mode: Disabled
ESC - Return to previous menu
Choose one of the above:
Figure 5-96. IP/IPX Spoofing Menu
Spoofing is a technique used to reduce network overhead, especially in wide area
networks (WAN). Some network protocols send frequent packets for management
purposes. These can be routing updates or keep-alive messages. In a WAN this can
introduce significant overhead, due to the typically smaller bandwidth of WAN
connections.
Spoofing reduces the required bandwidth by having devices, such as bridges or
Advanced Menu
↓1
Setup Menu
↓5
WAN Economy Menu
↓3
Spoofing Menu