Specifications

Installation and Operation Manual Chapter 3 Operation
SPS-6, SPS-12 Upgrading the Software 3-5
3. In the System Control menu, select option 12. The following screen appears:
THIS ACTION WILL ENABLE YOU TO DOWNLOAD A NEW SOFTWARE VERSION
AFTER RESET
In order to do so, please connect a terminal configured:
9600, N, 8, 1 to link no. 1 and follow the instructions on the
screen.
ARE YOU SURE? (YES/NO)
4. Type YES and press <Enter>.
5. Reset the device by pressing the Reset button on the front panel of the
module. If a problem occurs during the software download, the following
screen appears:
Software MAY not be valid!
Please select one of the following:
1.) 9600 bits/s
2.) 19200 bits/s
3.) 38400 bits/s
4.) 115200 bits/s
5.) Run the existing software (NO download)
6. Select option 5 to run the existing software. The following message appears:
Please change terminal setting to:
115200, N, 8, 1, LINK1
Start the software download.
When the software is downloaded successfully, the following message appears:
CONGRATULATIONS
Software loaded successfully.