Digital Video System Rear-Seat Entertainment USER MANUAL TH102MS USB SD 10.
Contents Welcome To DVS.................................................... 2 Setting Audio CH ............................................. 14 Setting Mirror ON/OFF...................................... 15 Safety Instructions................................................. 2 Setting Reverse ON/OFF .................................. 15 CAUTION .............................................................. 2 WARNING ............................................................. 2 Setting Language ......
Operating Instructions Welcome to DVS ‧Thanks for purchasing DVS Seat Back Monitor with Universal Stanchion Mount. This manual will help you use the exactly features of your new monitor. ‧Please read all safety and operating instructions in this manual carefully, and keep this manual for future reference. Safety Instructions Be sure to observe the following instructions and precautions to ensure safe using of this monitor.
Operating Instructions Using the remote control PRECAUTIONS Please read all safety and operating instructions in this manual carefully, and keep this manual for future reference. Personal Safety ‧The back seat passenger must fasten the seatbelt while operating this monitor. ‧Do not insert the USB while driving. Failure to do so may result in personal injury. Temperature Do not operate your unit in ambient temperature above +70°C (+158°F) or below -20°C (-4°F).
Getting St arted Correct Handling ‧Do not drop the disc while handling. ‧Hold the disc so you will not leave fingerprints on the surface. ‧Do not affix tape, paper, or gummed labels to the disc. ‧Do not write on the disc. INCORRECT Monitor Function Overview 7 CORRECT 8 9 10 1 Disc Cleaning Fingerprints, dust, or soil on the surface of the disc could cause the player to skip. For routine cleaning, wipe the playing surface with a clean, soft cloth from the center of the disc to the outer edge.
Getting St arted When Using the Remote Control Remote Control Function Overview When you use the remote control for the first time, pull the plastic tape before using the remote control. Plastic Tape Battery Replacement 1 . Opening the battery case. Pull up the battery tray. 2 . Replacing the battery. (CR-2025) CAUTION ‧Point the remote control at the remote sensors within 2 meters.
Getting St arted 1 POWER Switch the monitor power ON/OFF 2 OSD MENU 16 REPEAT RPT. Select the desired repeat mode. (1) DVD Disc: Chapter OSD Title REP. ALL OFF Enter or exit the on-screen display menu system. (2) CD/VCD Disc: 3 Repeat 1 EJECT DISK REP. ALL Repeat OFF Stop playback and eject the disc. 4 FM Transmisor 17 MUTE MUTE Disable or enable audio output. FM Switch the FM ON/OFF. VOL 5 DVD / USB /Memory Card USB/DVD Switch the DVD/USB/Memory Card mode.
Ba sic Operations Turning Power ON/ OFF Audio Mute Function The power state of the monitor will not be memorized when Ignition/ACC is turned off. When Ignition/ACC is turned back on, the monitor returns to OFF. Remote Control Front Control Keys 1. Press to turn ON. 2. To turn off the power, press and hold ‧While the power is ON, press Mute function. MUTE MUTE to turn the Mute function ON and OFF. Adjusting the Volume again.
MMD Operations Turning FM ON / OFF (Option) 1. Press to turn on the FM transmitter. 2. While FM is ON, press and to select FM desired FM frequency. 3. To turn off the FM, press FM again. ‧FM frequencies between 87.7MHz to 88.9MHz. Switching DVD / USB / Memory Card mode 1. Press to change DVD mode, USB mode or USB/DVD Memory Card mode. CAUTION Do not use USB or Memory Card while driving your vehicle. Always stop the vehicle in a safe location before performing these functions.
MMD Operations Video Menu 1. Press 2. Press OSD to display Video Menu. to select the desired item, and then press OSD again to confirm a selection. ‧The video menu on DVD mode will be different with AV2 and AV3 mode. For details, refer to “MONITOR SETUP” on Page13~15. Stopping Playback (PRE-STOP) 1. Press during playback.“PRE-STOP ” is displayed, and playback pauses. That position is stored in memory. 2. Press in the PRE-STOP mode to return to normal playback.
MMD Operations Switching the Audio Tracks DVDs can have different audio tracks. These alternate tracks can be switched during playback. 1. During playback, press . The sound switched between the alternate audio tracks recorded on the disc each time the button is pressed. AUDIO ‧The selected alternate track becomes the default setting every time the power is turned on or the disc is replaced. If the disc does not Include that track, the disc’s default language is selected instead.
MMD Operations Displaying the Disc Status Slow Motion Playback Use the procedure described below to display the status (title number, chapter number, etc.) of the currently playing DVD/VCD/CD on the monitor screen. Slow allows you to select different slow playback modes for a VCD / DVD during playback. 1. During playback, press DISPLAY. 8 The playback status is displayed. 2. The playback status display closes when DISPLAY is pressed again. 8 1.
USB Operations CAUTION ‧Not all function will operate for every formats. See the individual USB’s instructions for details on the features supported. ‧Do not use USB while driving your vehicle. Always stop the vehicle in a safe location before performing these functions. Failure to do so may result in serious injury or an accident. ‧If you try to perform an invalid operation (based on the type of disc being played), the message “INVALID KEY” will be displayed on the monitor screen.
Monitor Se tup Adjusting Picture The video menu on DVD mode will be different with AV2, AV3 and AV4 mode. Adjusting the Bright 1. Press button on the remote control. OSD The picture setting menu is highlighted. ‧Each source is independently adjustable. ‧Make adjustments within 10 seconds, otherwise the OSD (On Screen Display) will turn off automatically. 2. Press . OSD or to confirm a selection.
Monitor Se tup Adjusting the Color Density (AV2/AV3 only) 1. Press button on the remote control. The Setting Audio Mute ON/ OFF 1. Press button on the remote control. The OSD picture setting menu is highlighted. OSD 2. Press picture setting menu is highlighted. 2. Press OSD or to select COLOR, then press to confirm a selection. or to select MUTE, then press to confirm a selection.
Monitor Se tup Setting Mirror ON/ OFF 1. Press button on the remote control. The OSD picture setting menu is highlighted. 2. Press OSD or to select MIRROR, then press to confirm a selection. Setting Language 1. Press button on the remote control. The OSD picture setting menu is highlighted. 2. Press OSD ENGLISH VIDEO MENU BRIGHT CONTRAST COLOR TINT MUTE AUDIO CH MIRROR REVERSE LANGUAGE RESET EXIT ON / OFF 3. Press or 3. Press 4.
MMD Se tup DVD Setup Operation ■ Setting the System (default : Auto) Broadcast TV System can be manually switched. 3. Press The following steps 1 to 2 are common to each of the DVD settings described here. Refer to each section for details. 1. Press and hold or PAL / AUTO. 4. Press ENTER to save adjustment. SYSTEM SETUP SETUP on the remote control. The setup menu appears on the monitor. SYSTEM SCREEN SAVER SCREEN TYPE PASSWORD RATING DIVX [R] VOD DEFAULT EXIT SETUP 2.
MMD Se tup ■ Setting Password There is not original password. Language Setup 3. Press + Number key pad to setup OSD Language, Audio Language, Subtitle Language and Menu Language are adjustable. to save adjustment. ‧The Factory setting of the OSD language is ENGLISH. 0 password. 4. Press ENTER ‧This function can be performing when the player is during stop. 1. Press button on the remote control. The setup menu appears on the monitor. SETUP 2.
MMD Se tup ■ Setting Subtitle Language (default : Chinese) 4. Press or to select desired language. ‧There are 7 kinds of languages can be chosen. (Chinese, English, Japan, French, Spanish, Portuguese, German.) 5. Press ENTER to save adjustment. LANGUAGE SETUP OSD LANGUAGE AUDIO LANG SUBTITLE LANG MENU LANG EXIT SETUP CHINESE ENGLISH JAPAN FRENCH SPANISH PORTUGUESE GERMAN OFF Audio Setup Down Mix, Dynamic Range and Down Sample are adjustable. 1. Press SETUP button on the remote control.
Installation and Connections Before installing or connecting the unit, please read the following and page 2~4 of this manual thoroughly for proper use. CAUTION: The back seat passenger must fasten the seatbelt while operating the unit. WARNING: Make the correct connections. Failure to make the proper connections may result in fire or product damage. Use only in cars with A 12 volt negative ground. (Check with your dealer if you are not sure.
Installation and Connections Parts Indication 1. LCD Monitor 2. Slide Rail 3. Slide Block 4. Knob 5. Slide Block Linkage 6. Stanchion Washer 7. Screw Limitation Before installation, please make sure that the shape of headrest is available for installation.
Installation and Connections Installation Setp 1 Remove the headrest Remove the headrest from the seat. (Figure 1) 3 Install the connecting rod Let the headrest stanchion pass though the slide block linknge. (Figure 3) Headrest Headrest stanchion Headrest stanchion Slide block linkage Buckle (Figure 1) (Figure 3) CAUTION Before remove the Electric Headrest, please remove the electric sensor first. 2 Measure the diameter of headrest stanchion If the diameter of headrest stanchion is less than 16.
Installation and Connections 5 Install and fix the monitor Slide the monitor into slide rail. Then adjust the monitor to the best position and tighten the konb. (Figure 5) Slide Rail Monitor Konb 2. Without Seatback Cover 1) Stick the marked with sticker on the position you would like to cut. 2) According to the marked with sticker to cut a 2.4cm hole in the top of the seatback, and then insert the base of cover into the hole. (Figure 6-2) 3) Push the Power Cables into the seat slowly.
Installation and Connections 7 Install the headrest Put the headrest back to the seat. (Figure 7) Monitor Headrest stanchion Buckle (Figure 7) 8 Connect th power cable Connect the power cable to the monitor.
Installation and Connections Connections Power Connector Black Power Cable AV Connectors Yellow Video Input Connector This connector is used in combination with the video inputs of other video products (AV head out or TV Tuner). White(L) Audio Input Connectors Red ( R) These connectors are used in combination with a head unit or TV Tuner with audio output connectors.
Installation and Connections System Connections Multi Media Station TV Tuner AV Input L R V AV Output V V R R R L L AV Input （Red） （Yellow） R （Yellow） V （Red） L ( )GND (Black) （Black） R Power Filter V ACC ( ) （Black） V L L Body ( ) Remote In AV Output Remoten Out (Blue) (+)ACC (Red) Antenna (Green) AV 3 (Figure 1) 10.
Information Accessories Screen Slide block x1 Sliding block linkage x2 Signal cable Power cable Stanchion washer - 1mm depth x2 - 2mm depth x2 x2 AV3 Cable x4 Remote control O E D R S TU R ZO 1 N O 0 M T IT IM 4 D M E R A 7 2 LE 3 LO S Y LA A 8 R D W V P /D IS B D 5 S FM -B U N D A 6 TU M E O S N G P 9 LE S O U R E U C S . E B N M TE E R N U R P U O A V T.
Information General Specifications DISPLAY SCREEN Model TH102MS Size 10.2 inch Aspect Ratio 16:9 Type Transparent type TN Liquid Crystal Display System TFT-LCD, Active Matrix Number of Elements 800(W)x480(H)x3 1.152M pixels (WVGA) Back Light LED Brightness 400cd/m 2 Loader System Quanta KDR-081 Auto Dimmer Built-in USB Interface USB 1.0 Card Reader MS/MMC/SD compatible GENERAL Operating Voltage Form 10V to 16V (DC) Typical : 12V Power Consumption 1.4A (MAX) 1.2 (TYP) 0.
Information Troubleshooting CAUTION If you encounter a problem, please turn the power off, then on again. If the unit is still no functioning normally, please review the items in the following checklist. This guide will help you isolate the problem if the unit is at fault. Otherwise, make sure the rest of your system is properly connected or consult your authorized dealer. No function or display. Vehicle’s ignition off.
Information Image stops sometimes. Disc is scratched. - Replace with an non-scratched disc. Picture is unclear or noisy. Disc is being fast-forwarded or fast-reversed. - The picture may be unclear, but this is normal. Vehicle’s battery power is weak. - Check the battery power and wiring. (The unit may malfunction if the battery power is under 11 volts with a load applied.) Monitor’s fluorescent tube is worn out. - Replace the monitor fluorescent tube. Image stops sometimes. Disc is scratched.
Information Warranty Card ‧Please remember to ask for the authentication seal from the retailing shop while buying this product. If it’s incorrectly or there is not authentication seal, we will not guarantee your right. If the units didn’t have serial number or miss it, we will unable to offer warranty for the units. ‧We will delivery the product after it passed the tight quality control and detailed examining.
33 Seat Back Monitor
Rear-Seat Entertainment 34
DVS-MS-980916-v0924
