Installation Manual

Radarfind Corporation

October 2008 V2 Collector and Remote Radio Installation Instructions Page 11

Checking the Installed Unit

After installation, check the unit to ensure that it is operating properly.

1. Turn on power.

2. Verify that the LED’s on the Collector run through the power-up sequence correctly.

Technical Specifications:

RadarFind Collector C22-2812

Power Supply: IEEE P802.3af PoE or 48VDC (from optional RadarFind wall adapter)

Power: 8W maximum

Communications: IEEE 802.3u (RJ45; category 5e); IPv4 (static or DHCP)

EIA-485 (Remote Radio span connections)

Operating: 0 to 50º C, 5% to 90% RH, non condensing

Dimensions: 8.75”L X 6.5”W X 2.25”D (plus 0.5” of flange on top and bottom)

Remote Radio Model M22-0110

Communications FHSS FCC Subpart 15.247

Transmit Power +8dBm maximum

Communications 902-928 MHz FSK

Remote Radio FCC Label