Installation Manual

Radarfind Corporation

October 2008 V2 Collector and Remote Radio Installation Instructions Page 3

Caution:

If the equipment is damaged, do not attempt to install or operate it.

1. When the equipment arrives, unpack the unit(s).

2. Check for damage that may have occurred in transit.

3. If contents are damages contact the carrier immediately to file a claim stating the extent of the

damage.

General Safety Information

• Wear safety goggles when working under conditions that might be hazardous to your eyes.

• Keep tools where you and others will not fall over them.

• Keep the installation area clear during the installation.

• Do not wear loose clothing that could become caught in the equipment.

Electrical Safety Information

• Before working on electrical equipment, remove jewelry (necklaces, rings, watches, and so on).

• Refer to the site’s safety precautions for details about site-specific hazards.

• Refer to the collector’s name plate for information on voltage and current.