Manualshelf

Installation Manual

ManualsBrandsRadarFind ManualsElectronicsINDOOR EQUIPMENT LOCATION SYSTEM
12345678910
Radarfind Corporation
October 2008 V2 Collector and Remote Radio Installation Instructions Page 9
Copyright RadarFind Corp. 2008
Figure 8: Remote Radio connector block.
Remote Radio punch-down or termination blocks panels will be marked with the ID of each Remote Radio
for the Collector.
The Remote Radio ID # ends in A,B,C, or D, which corresponds with the jack ID on the Collector. Each
Collector may have 2, 3, or 4 Remote Radios.
Mark 4 jumper cables on both ends with their letter designation A/B/C/D and cable each Remote Radio
jack to the matching jack on the Collector A-A, B-B, etc.