Installation Manual

Radarfind Corporation

12/5/2008 PLM Reader Installation Instructions Page 10 of 10

Tamper-resistant mounting accessories

RadarFind R11-1411 Readers are packaged with standard 6/32 combination head screws

for the center plate retention screw and the four corner anchor screws. Tamper resistant

screws and matching drivers are available as accessories.

Note: The Reader UL 914C approval - for use as an electrical extension ring - when installed as a

direct wired device requires the use of the provided wall anchors on all four corners. The 50-100-

1020 tamper-resistant screws are custom manufactured for use with these UL approved wall

anchors.

RadarFind R11-1411 Reader Accessories

Part Number Description

80-100-1019

Adapter mounting plate for R11-1411 Reader

50-100-1019

(1) 6/32 2” tamper-resistant center plate

screw for

R11-1411 Reader

50-100-1020 (4) 6 /32 3” tamper-resistant wall mounting

screws for R11-1411 Reader

50-100-1021 Tamper-resistant screw driver for 50-100-

1019

50-100-1022 Tamper-resistant screw driver for 50-100-

1020 for R11-1411 Reader