User's Manual

12/28/2006 Radarfind Corporation— Phone 877 Radarfind—www.radarfind.com 7
Installation Steps – Attaching tags with adhesive:
Step # 1 -
Select location for tag and clean area for adhesive with alcohol.
Step # 2 - Attach adhesive to tag base with adhesive or straps.
Step # 3 – (Assuming that you have already entered your assets ) Select asset by entering the serial number
or asset inventory number. Enter or scan tag ID into the Radarfind software, select which tag type, status or
non-status, and hit <Tag!>
Once a tag is assigned to an asset any searching or display can be done by looking for the asset.
If you need to remove a tag from an asset please un-assign the asset in the following screen by selecting the
correct asset and clicking DETACH.