Installation Manual

Radarfind Corporation

12/5/2008 A-Tag Installation Instructions Page 5 of 10

General Guidelines:

All tags on an asset type should be the same type, e.g. all infusion pumps should

have an A-Status Type tag.

Select a standard location on each asset type for the tag. For A-Status tags select a

location where the status indicator is plainly visible and can be easily accessed by

the user when switching the status switch. Be sure to choose a place where the tag is

protected from physical impacts when the device is being used or transported.

Example Status tag placement

The tag location should not interfere with normal use of the asset, and have

sufficient clearance on the open end of the base to insert the locking base key and

insert and remove the tag.

For best performance do not place the tag in a location covered with metal, such as

inside of a control box or enclosed area under a bed frame.