Installation Manual

Radarfind Corporation

12/5/2008 A-Tag Installation Instructions Page 8 of 10

Installation Steps – Attaching tags with adhesive:

Step # 1 - Select location for tag and clean area for adhesive with alcohol.

Step # 2 - Attach adhesive to tag base with adhesive or straps.

Step # 3 – (Assuming that you have already entered your assets - See next page for

ADDING assets in the RadarFind database.) Select asset by entering the serial number or

asset inventory number. Enter or scan tag ID into the Radarfind software, select which tag

type, status or non-status, and hit <Tag!>

Once a tag is assigned to an asset any searching or display can be done by looking for the

asset.

If you need to remove a tag from an asset please un-assign the asset in the following

screen by selecting the correct asset and clicking DETACH.