Instructions
20
EN
13. End point adjustment
Set the lower end point
3.
+
Simultaneously press and hold the
buttons.
The roller shutters travel down.
4.
+
Release the buttons...
...as soon as the roller shutter achieves the
desired position for the lower end point.
The roller shutter stops and the lower end
point is stored.
IMPORTANT
Please ensure that the belt is not excessively slack when
reaching the lower end point.
Changing or correcting the end points
5.
Move the roller shutters to the centre position and
congure the respective end point again.
NOTE
After a period of time it may be necessary to recongure
the end points as the belt may elongate during the proc-
ess of operation.
i