Instructions

7
EN
4. General safety information
Incorrect use leads to an increased risk of injury.
◆ Train all personnel to use the RolloTron Standard safely.
◆ Avoid allowing persons with limited abilities to operate
the equipment and prevent children from playing with
xed controllers.
◆ Watch the moving roller shutters and keep other peo-
ple away from the area to avoid injury in the event the
shutters suddenly slip.
◆ Undertake all cleaning work on the roller shutters with
the equipment disconnected from the mains power.
According to DIN EN 13659, it is necessary to determine that
the movement conditions for the shutters are maintained in
accordance with EN 12045. The displacement must amount
to at least 40 mm on the lower edge in the rolled-out posi-
tion with a force of 150 N in the upwards direction.
In doing so, it must be ensured that the extending speed of
the shutters for the nal 0.4 m is less than 0.2 m/s.
Exceeding the maximum permissible running time
(KB) can overload and damage the RolloTron Standard
◆ The maximum permissible running time for a cycle
may not be exceeded when the equipment is in
operation. For this reason, the RolloTron Standard
has an automatic running time limit (KB) of four
minutes.
◆ If the running time limit is triggered, then the
RolloTron Standard must be left for at least 12
minutes to cool down. Full operational availabil-
ity is reestablished after approx. one hour. During
this period, all 3 LEDs light up successively.
STOP
The mains socket and plug must be easily accessible
at all times.
i