EN Electronic Roller Shutter Belt Winder RolloTron Comfort Operating and Assembly Manual............................................................................ 1 Item No.: 1623 45 x9 1623 60 19 (Comfort Plus) 1615 45 19 (Small belt) VBD 567-2 (04.
i With your purchase of RolloTron Comfort, you have chosen a quality product manufactured by RADEMACHER. Thank you for the trust you have placed in us. This roller shutter belt winder has been designed both in order to provide optimal convenience and operability as well as to ensure solidity and durability. Having applied uncompromising quality standards, and carried out thorough testing, we are proud to be able to present you with this innovative product.
i EN Table of Contents i Dear Customer ............................................................ 2 1. Scope of delivery ....................................................... 4 2. General view ........................................................... 5 3. Display overall view................................................... 6 4. Key to symbols ........................................................... 7 5. General safety information..................................... 7 6.
i EN 1. Scope of delivery (item no. 1623 45 x9) * * also applies to item numbers 1623 60 19 / 1615 45 19 Legend 2. 3. 1. 4. 5. 6. 7. 4 1. Belt winder RolloTron Comfort or Comfort Plus 2. 2 x assembly screws (4 x 55 mm) 3. Disengaging bracket (in housing) 4. Connection cable with Euro-plug 5. Reel compartment cover 6. Cover plate 7. Traction relief mechanism incl.
i EN 2. General view (item no.
i EN 3. Display overall view Display symbol legend [ MO ... SO ] (MON...
i 4. Key to symbols Risk of fatal electric shock. ◆◆ This sign warns of danger when working on electrical connections, components, etc. It requires that safety precautions be taken to protect life and health. EN NOTE / IMPORTANT In this way, we wish to make you aware of the following content in order to ensure optimal functionality. Important safety information. This concerns your safety. Please pay particular attention and carefully follow all instructions marked with this symbol. i 5.
i 5. General safety information Incorrect use leads to an increased risk of injury. ◆◆ Train all personnel to use the RolloTron Comfort safely. ◆◆ Avoid allowing persons with limited abilities to operate the equipment and prevent children from playing with fixed controllers. ◆◆ Watch the moving roller shutters and keep other people away from the area to avoid injury in the event the shutters suddenly slip.
i Use the RolloTron Comfort exclusively... ... for opening and closing roller shutters with a permissible belt. Only use original spare parts from RADEMACHER. ◆◆ By doing so, you avoid the risk of malfunctions and damage to your RolloTron Comfort. ◆◆ As the manufacturer, we provide no guarantee for the use of third-party components and accept no liability for consequential damage resulting from such. ◆◆ All repairs to the RolloTron Comfort must be undertaken by authorised customer service personnel.
i EN 8. Permissible roller shutter belts IMPORTANT Only use belts of the permissible lengths. The RolloTron Comfort can be damaged if it is used to retract excessively long belts. NOTE The specifications are intended for guidance only and apply to an ideal installation situation. The actual values may vary due to local conditions.
i EN 9. Brief description The RolloTron Comfort is a roller shutter drive designed for use inside. The unit is installed as a flush-mounted device. The power supply is provided via the enclosed connecting cable with plug or a fixed installed lead. NOTE Please ensure that the belt winds evenly during its subsequent cycle after the obstacle detection system has triggered. Soft-start / Soft-stop The RolloTron Comfort is equipped with a Soft-start and Soft-stop function.
i ◆◆ ◆◆ ◆◆ ◆◆ ◆◆ ◆◆ ◆◆ ◆◆ ◆◆ ◆◆ ◆◆ ◆◆ ◆◆ 12 EN 10. Overview of features Display background illumination Operational demonstrator Manual operation Direct configuration and movement to a target position AUTO/MANU - switchover Easy configuration with menu-driven operation Weekly programme: ■■ Weekly switching times (2 x) –– 1 x [ ] and 1 x [ ] for (MON...SUN) [ MO...SO ] ■■ Weekday and weekend switching times (4 x) –– 1 x [ ] and 1 x [ ] for (MON...FRI) [ MO...
i i EN 11. General assembly instructions Poor routing of the belt can cause the belt to fail and leads to unnecessary loads on the RolloTron Comfort. Incorrect installation can lead to property damage. ◆◆ Install the belt winder so that the belt runs as straight as possible into the device, in order to avoid unnecessary friction and wear. ◆◆ Strong forces are exerted during operation of the system which require secure installation on a firm base. 11.
i 1. 14 EN 11.2 Preparation for installation Take measurements. ◆◆ Check that the belt box has sufficient space to house the RolloTron Comfort. All dimensions in mm All dimensions in mm RolloTron Comfort Item no.: RolloTron Comfort Plus Item no.
i EN 11.2 Preparation for installation 2. Remove the old belt winder, if you are carrying out a conversion to an existing roller shutter system. ◆◆ Let the roller shutter move fully down, until the slats are completely closed. ◆◆ Remove the old belt winder and unreel the belt. There is a risk of injury from the pre-tensioned springs on the old belt winder. ◆◆ The spring unit can suddenly recoil when it is removed.
i 12. Safety instructions for electrical connection Danger due to electric shock when working on all electrical systems. ◆◆ The electrical connection and all work on electrical systems must only be carried out by a qualified electrician in accordance with the connection instruc-tions in these operating instructions. ◆◆ Carry out all installation and connection work only in an isolated, zero-volts state. ◆◆ Disconnect all phases of the mains power supply cable and secure it to prevent any reconnection.
i EN 12.1 Electrical connection 1. Connect the supplied connecting cable. The colour coding is irrelevant for the installation. Damaged cables can cause short circuits. ◆◆ Pay attention that cables are laid safely. ◆◆ The connecting cable may not be pinched when screwing on the belt winder as this could lead to damage. Traction relief RolloTron Comfort 2. RolloTron Comfort Plus Lay the connecting cable safely. ◆◆ Lay the connecting cable to the RolloTron Comfort in a cable duct. Cable duct 3.
i EN 13. Drawing-in and fastening the belt 1. 2. Insert the mains plug into the socket. Press the [ Up ] key until the fastening hooks are easily accessible in the reel compartment. There is a risk of injury from the reel. ◆◆ Never reach into the reel compartment when the motor is running. 3. Always remove the mains plug from the socket before feeding the belt into the top of the RolloTron.
i 14. Mounting the RolloTron Comfort EN Mount the RolloTron Comfort as straight as possible, so that the belt can wind correctly. Ensure that the RolloTron Comfort sits freely in the belt box and that it isn't in contact with the masonry, otherwise noise will be generated during operation. 1. Slide the RolloTron Comfort into the belt box and screw it tight using the screws provided.
i 14. Mounting the RolloTron Comfort 3. Mount the light sensor (not included, see page 71, Accessories). ◆◆ Insert the light sensor plug into the designated connection socket at the bottom of the RolloTron Comfort. ◆◆ Subsequently secure the light sensor to the window pane using the sucker. NOTE The position of the light sensor on the window pane determines the point at which the roller shutters will close to in the event of sunlight. 4.
i EN 15. Brief description of the key functions Operating keys [ Up / Down ] ◆◆ Manual operation [ Up ▲ / Down t ]. SET/Stop key, [ ] ◆◆ Configuration (setting) of various functions. ◆◆ Manual roller shutter stop. Menu key, [ M ] ◆◆ Call up the main menu. ◆◆ Back to previous menu or standard display. Setting keys, [ / ] ◆◆ Setting of parameters (more / less). ◆◆ Pressing one of the keys for an extended period causes the numbers to change more quickly in the respective direction.
i EN 15.1 Brief description of the standard display and main menu The standard display (example) The main menu Menu number Functions / menus ◆◆ Displays the current day of the week and time. ◆◆ Displays the activated functions. ◆◆ Manual operation of the RolloTron Comfort is only possible from the standard display. 22 ◆◆ Enables display and selection of the individual functions and menus. ◆◆ Displays the respective menu number. ◆◆ Manual operation is not possible from the main menu.
i EN 15.2 Introduction to opening and closing the menus 1. 5. Call up the main menu. Pressing the [ M ]-key in the standard display causes the main menu to open. 2. In order to do so, press and hold the [ M ] button for one second. Briefly pressing the [M] key causes the display to go back one menu step. Open the menu by pressing the [ OK ] button. If no key is pressed within approx. 120 seconds, the display changes back to the standard display. ▲ 4. 1 sec.
i 16. Initial commissioning with the help of the installation wizard An installation wizard is available in order to help you configure the RolloTron Comfort quickly and easily. The wizard automatically guides you through the configuration process for initial commissioning or after a software reset, see page 59. Quitting the installation wizard. Pressing the [M] key for 2 seconds causes the installation wizard to be cancelled prematurely.
i 16. Initial commissioning with the help of the installation wizard 1. Set the upper end point. 3. Set and confirm the time. NOTE Pressing the setting key for an extended period causes the numbers to progress more quickly. a) In order to do so, press and hold the [ Up ] key. b) The roller shutters travel up. c) Release the [ Up ] key as soon as the desired upper end point has been reached. EN 4. Set and confirm the date (day of the week / month). 5. Set and confirm the year. 6.
i 16. Initial commissioning with the help of the installation wizard 7. Set and confirm the opening time [ ]. b) If [ ASTRO ] is selected, then the calculated opening time for the current day is displayed. This closing time mode applies to the entire week (MON...SUN) [ MO...SO]. At this point, the opening time is preconfigured as the weekly switching time (MON...SUN) [ MO...SO]. a) Configure the switching time mode for the opening time [ ].
i 16. Initial commissioning with the help of the installation wizard NORMAL The roller shutters close at the configured closing time. ASTRO The roller shutters close at the daily calculated dusk time. 9. EN The standard display is shown as soon as the final setting is confirmed. The RolloTron Comfort is now ready for operation. The previously configured closing time is interpreted as "latest at xx:xx hours". SENSOR The roller shutters close every day at dusk, as measured by the light sensor.
EN 17. Manual operation Manual operation is possible in any of the modes and has priority over the programmed automatic functions. 1. 2. 3. Open the roller shutters. Briefly pressing the button causes the roller shutters to move to the upper end point. / or Causes the roller shutters to stop in the interim. Closing the roller shutters. Briefly pressing the button causes the roller shutters to move to the configured ventilation position or to the lower end point.
EN 17.1 Moving to a target position If necessary, you can enter an arbitrary target position for your roller shutters which you can then move to directly. 1. The RolloTron Comfort is able to move to the target position and stop the roller shutters fully independently and automatically. It is not necessary to give an additional manual movement or stop command. a) In order to do so, briefly press one of the two setting keys.
EN 18. Menu overview / main menu Main menu Icon 30 Menu Page 1 Automatic mode..........................31 2 Switching times.. ..........................33 3 Automatic dusk control .............40 4 Automatic solar function...........43 5 Automatic dawn control.. ...........46 6 Random function.........................48 7 System settings............................
i EN 18.1 [ AUTO ] Automatic mode; brief description Automatic mode on Automatic mode off Icon in standard display Icon in standard display ◆◆ All automatic functions are deactivated; only manual operation is possible. ◆◆ All automatic icons are switched off in the standard display. Automatic mode is active, all automatic functions are switched on, e.g.
EN 18.1.1 Menu 1- Automatic mode on / off 1. Call up the main menu. Toggling directly to the standard display 2. Select and open menu 1 [ AUTO ]. You can also directly toggle automatic mode on and off in the standard display. 3. Select and confirm the desired setting. On = Automatic mode on OFF = Automatic mode off 4. The main menu appears again once this is confirmed. 1. In order to do so, press and hold [ OK ] for approx. one second. approx.
18.2 Switching times (opening and closing times) [ / ]; brief description You can configure various opening [ ] and closing times [ ] for the RolloTron Comfort in order to open or close your roller shutters at your preferred times. EN [ 1 ] Weekly switching times You can set two different switching times here: Determining the mode of operation and number of opening [ ] and closing times [ ]: 1 x opening time [ ] and 1 x closing time [ ] valid from Monday to Sunday (MON...SUN) [ MO...SO].
18.2 Switching times (opening and closing times) [ / ]; brief description Double the amount of switching times by activating a second switching time block: If necessary you can double the amount of available opening and closing times. In order to do so, a second switching time block (n = 2) must be activated in the weekly programme, see page 53. Assigning opening and closing times to a second switching time block.
18.2 Switching times (opening and closing times) [ / ]; brief description Selecting a switching time mode. ■■ A switching time mode can be selected during the settings for the first opening and closing times. The following switching time modes are possible: ◆◆ NORMAL ◆◆ ASTRO ◆◆ SENSOR ■■ ■■ Brief description of the switching time modes. The opening and closing times are calculated in relation to the date and postcode. Subsequently they are linked to the previously configured switching times.
18.2 Switching times (opening and closing times) [ / ]; brief description ◆◆ SENSOR (only for closing times [ ] ) The closing time is controlled by a light sensor in relation to the level of brightness. ■■ In addition, the measured twilight value is linked to the previously configured closing time. The configured closing time is interpreted as "latest at xx:xx hours". ■■ Example a: –– In winter dusk begins, for example, at approx. 17:00 hours. –– The closing time has been set to 20:00 hours.
EN 18.2.1 Menu 2 - Configuration of opening and closing times [ / ]. NOTE The mode of operation and the number of opening and closing times that can be configured depends on the desired switching programme, see page 33. The header of the display indicates which switching programme is currently active (see example to the right). This also applies to the closing times. The settings for the opening and closing times [ / ] is identical for all switching programmes.
18.2.1 Menu 2 - Configuration of opening and closing times [ / ]. 6. Set and confirm the closing time [ ]. b) If [ ASTRO ] is selected, then the calculated closing time for the current day is displayed. The closing time applies to all days of the week (MON... SUN) [ MO. . SO ]. a) Configure the switching time mode for the closing time [ ]. c) Return to main menu. u NORMAL u ASTRO u SENSOR NORMAL The roller shutters close at the configured closing time.
18.2.1 Menu 2 - Configuration of opening and closing times [ / ] EN 8. Set and confirm the second opening time [ ]. OFF = The opening time is deactivated. INFORMATION ABOUT THE [ ASTRO ] SWITCHING TIME MODE ◆◆ If [ ASTRO ] is selected as the switching time mode, the calculated darkness time can be individually customised by means of an offset between –60 and +60 minutes. This can be configured in menu 3, see page 41. 9. Set and confirm the second closing time [ ].
EN 18.3 Automatic darkness control; brief description The automatic dusk function causes the roller shutters to close automatically to the lower end point or configured ventilation position.
18.3.1 Menu 3 - Customising the automatic dusk function [ ]. 1. 3.2. Call up the main menu. EN [ ASTRO ] Setting an offset. 2. 3. 3.1. The offset function can be used to modify the calculated "Astro" time by +/- 60 minutes. Select and open menu 3 [ ] Automatic dusk function. Customise the automatic dusk function in accordance with the selected switching time mode. [ NORMAL ] No customisation is possible in [NORMAL] switch time mode. Select switch time mode, see page 35.
18.3.1 Menu 3 - Customising the automatic dusk function [ ]. 3.3. [ SENSOR ] Customisation of the twilight limit value in switch time mode [ SENSOR ]. If the set limit value is not met due to the onset of twilight, the roller shutters will close. (ACTUAL) [ IST ] value Currently measured brightness (e.g. 12). "- -"= too bright (SET) [ SOLL ] value Configurable set limit 01 = very dark, approx. 2 Lux 15 = less dark, approx. 50 Lux a) Return to main menu.
EN 18.4 Automated solar function; brief description The automatic solar function enables brightnessdependent control of the roller shutters in combination with the light sensor. To do this, the light sensor is secured to the window pane with a sucker and then plugged into the RolloTron Comfort. Automatic solar function Automatic moving up and down of the roller shutter once a set limit is exceeded. The roller shutter end position can be freely selected by changing the light sensor position.
EN 18.4 Automatic solar function; brief description Automatic lowering If the sensor detects uninterrupted sunlight for 10 minutes, the shutter will descend until its shadow covers the light sensor. 10 mins. sun Automatic clearing After approx. 20 minutes, the roller shutter is automatically raised a small amount to uncover the sensor. If the sun continues to shine, then the roller shutter remains in this position. If the brightness decreases, it returns to the upper end point.
18.4.1 Menu 4 - Configuring the automatic solar function [ ]. 1. 2. 3. 4. EN Call up the main menu. Select and open menu 4 [ ] Automatic solar function. Activate and confirm the automatic solar function. On = automatic solar function on OFF = automatic solar function off (ACTUAL) [ IST ] value Currently measured brightness (e.g. 12). "- -"= too dark (SET) [ SOLL ] value Configurable set limit 31 = minimal sun, approx. 2000 Lux 45 = bright sunlight approx. 20000 Lux a) Return to main menu.
EN 18.5 Automatic dawn function; brief description When configuring opening times [ ] it is possible to link them to a switch time mode, see page 36. The calculated dawn time can be customised by linking the opening times with the [ ASTRO ] switch time mode. Link to the opening time [ ] The previously configured opening time is interpreted as "earliest at xx:xx hours".
18.5.1 Menu 5 - Customising the automatic dawn time [ ]. 1. 3.2. Call up the main menu. EN [ ASTRO ] Setting an offset. 2. 3. 3.1. The offset function can be used to modify the calculated "Astro" time by +/- 60 minutes. Select and open menu 5 [ ] Automatic dawn function. Customise the automatic dawn function in accordance with the selected switching time mode. Select switch time mode, see page 35. ◆◆ NORMAL ◆◆ ASTRO a) Subsequently the resulting closing time is displayed.
EN 18.6 Random function; brief description The random function enables a random delay of the set timer periods ranging between 0 and 30 minutes. NOTE The corresponding icon flashes in the standard display when the random function is activated, during the period that the movement command is being delayed. The random function is executed for: ◆◆ all automatic opening and closing times. ◆◆ All switch times realised by the automatic darkness function via the Astro programme.
18.7 Menu 7 - System settings [ EN ]; brief description This menu enables you to configure additional device and system settings in order to customise your RolloTron Comfort to your individual preferences and local conditions. Menu 7 - System settings Icon The procedure for opening and configuring a menu has previously been described on page 23. For this reason, the following section serves to describe the individual system menus and their respective parameters. – Menu 7.1 7.2 7.3 7.4 7.5 7.6 7.
18.7.1 Menu 7.1 - Set time and date [ 1. EN ] Select and open menu 7.1 [ ] Time and date. b) Date [Day.Month] Setting order a) Time 18.7.2 Menu 7.2 - End point configuration [ 1. 2. 50 First move the blinds manually to the centre position. Select and open menu 7.2 [ ] End points. c) Year ] Setting order a) Set the upper end point, see page 24. b) Set the lower end point, see page 24.
18.7.3 Menu 7.3 - Configure ventilation position [ If you want your roller shutters to close at a different position to the lower end point, you can use this function to determine an arbitrary position (e.g. as a ventilation position). b) Move the roller shutters to the desired position. or c) Enter the desired ventilation position by modifying the percentage value. When closing auto-matically, the roller shutters will stop at the ventilation position. However, they can subsequently be closed manually.
18.7.4 Menu 7.4 - Set postcode 1. Select and open menu 7.4 Postcode. a) Set and confirm the postcode. 52 EN NOTE: ◆◆ Only the first two digits of the code are entered for German cities. ◆◆ Please refer to the time zone table on page 70 for various European cities. ◆◆ If the RolloTron Comfort is not being used in Germany, it may be necessary to switch off the auto-matic summer / winter clock change function.
18.7.5 Menu 7.5 - Weekly programme [ EN ] configuration The subsequent mode of operation and the number of opening and closing times that can be configured depends on the desired switching programme. You can choose from three different switch time pro-grammes in the weekly programme.
EN 18.7.6 Menu 7.6 - Configure motor speed The maximum running speed of the motor can be configured if necessary (e.g. to reduce noise). 1. a) Set and confirm the desired speed. 1 2 3 = low = medium = high Select and open menu 7.6 Motor speed. 18.7.7 Menu 7.7 - Device settings, brief description This menu enables additional basic settings to be made for individually configuring your RolloTron Comfort. The settings are performed in various sub-menus. 54 Sub-menus: 7.7.1 - 7.7.
18.7.8 Menu 7.7.1 - Automatic summer/winter changeover on/off The RolloTron Comfort features an automatic summer/ winter changeover function. Recommendation for operating the RolloTron Comfort outside Germany. If the controller is not being used in Germany, it may be necessary to switch off the automatic summer / winter clock change function. 1. EN Select and open menu 7.7.1 Automatic summer/ winter changeover. a) Set automatic summer/ winter changeover to on / off.
EN 18.7.10 Menu 7.7.3 - Configure continuous display backlighting Pressing one of the operating keys causes the back-lighting in the standard display to switch on at full intensity. 1. Subsequently the brightness gradually fades down to the configured value. Select and open menu 7.7.3 Display backlighting. a) Configure and confirm the desired brightness. 0 = Display back lighting for the continuous dis play is switched off.
EN 18.7.12 Menu 7.7.5 - Switch key lock on/off You can activate the key lock in order to protect the RolloTron Comfort against unintentional input. Automatic activation after approx. two minutes. If the key lock is activated and no keys are pressed within a period of two minutes, the key lock is activated automatically. Activate / deactivate the key lock directly from the standard display. Press and hold the [ SET/ Stop ] key for four seconds.
EN 18.7.13 Menu 7.7.6 - Display software version This menu enables the current software version for the RolloTron Comfort to be displayed. 1. Select and open menu 7.7.6 Software version. a) Subsequently the version number will be displayed.
EN 19. Erase all settings, software reset If necessary, you can erase all of your settings and return the RolloTron Comfort system to its original factory settings. 1. 2. Next, the device's software version will be displayed for a few seconds. All settings will be erased and reset to the default factory settings. Simultaneously press and hold all four keys for 5 seconds, until all of the icons are shown on the display.
i 21. Removing the RolloTron Comfort (e.g. in the event of a move) 1. + 2. + + Delete all settings. Simultaneously press and hold the buttons for 5 seconds. Fully close the roller shutters. Keep the button held down. 3. In doing so, pull out the belt as far as possible from the top of the RolloTron Comfort. 4. Remove the cover plate from the lower mounting holes. ◆◆ You can remove the front panel by gripping the small notch in the lower side of the device. 5.
i 21. Removing the RolloTron Comfort (e.g. in the event of a move) 7. Check the position of the fastening hook and move the hook into an easily accessible position if necessary. 8. Subsequently remove the mains plug permanently from the socket. 9. Release the belt from the fastening hook and pull it out completely from the front of the RolloTron Comfort.
i In the event that the RolloTron Comfort unit fails and the motor no longer runs, you can use the disengaging bracket provided in order to fully remove the belt from the belt winder unit, without the need for cutting it. 1. 2. Remove the mains plug from the socket. 3. Release the drive with the help of the supplied disengaging bracket. 4. RolloTron Comfort Drive release Dismantle the RolloTron Comfort as previously demonstrated on page 60.
i EN 23. What to do if... ? Fault Possible cause / solution ... the RolloTron Comfort indicates no functions? Check the power supply incl. connecting cable and plug. ... the RolloTron Comfort no longer reacts in the morning The electronic system switched off the drive after closing the roller at the configured switching time? shutters because the deflection roller stopped turning.
i EN 23. What to do if... ? Fault Possible cause / solution ... the roller shutters stop during downward travel? a) The roller shutters may have hit an obstacle. Move the roller shutters back up and remove the obstacle. b) Slats have shifted out of alignment. If possible, move the roller shutters back up and realign the slats.
i EN 23. What to do if... ? Fault Possible cause / solution ... the RolloTron Comfort no longer reacts to manual commands and a temperature icon is shown on the display? The maximum running time of the drive has been exceeded, see page 8. ... the RolloTron Comfort no longer reacts to automatic commands and an error message [ Er02 ] is shown on the display? a) The RolloTron Comfort is no longer ready for operation. Carry out a hardware reset in accordance with page 59. The motor is too hot.
i 24. Information about maintenance and care of your equipment Maintenance Care IMORTANT Inadequate maintenance may lead to personal injury through damage to your RolloTron Comfort and to the roller shutter system. You can clean the RolloTron Comfort using a lightly dampened cloth. Please do not use aggressive or abrasive cleaning agents. ◆◆ Please check the RolloTron Comfort and all of your roller shutter components regularly for damage.
i EN 25. Technical Specifications Supply voltage: 230 V / 50 Hz; 230 V / 60 Hz Power reserve Nominal power: 70 W Standby power: < 0.35 W The RolloTron Comfort has a power reserve of approx. 8 hours. Nominal torque: - RolloTron Comfort - RolloTron Comfort Plus 10 Nm 14 Nm Maximum speed: - RolloTron Comfort - RolloTron Comfort Plus 30 RPM. 24 RPM.
EN 26. Tractive force diagrams Lifting weight [ kg ] i 2 3 4 6 7 = = = = = = = 68 5 Lifting weight [Kg] Belt thickness 1.0 mm Belt thickness 1.3 mm Belt thickness 1.
i EN 27. Works Settings Automatic: On Timer periods: On Up time: 7:00 hours Down time: 20:00 hours, switch time mode [ NORMAL ] Automatic solar function: OFF (off ) random function: OFF (off ) Time / date: 12:00 hours / 01.05.
i Belgium 101 Antwerp 102 Bruges 103 Brussels 104 Liege 105 Mechelen 106 Mons 107 Ostend Denmark 108 Aalborg 109 Ringsted 110 Esbjerg 111 Horsens 112 Kolding 113 Copenhagen 114 Svendborg 115 Randers England 116 Aberdeen 117 Birmingham 118 Bristol 119 Glasgow 120 London 121 Manchester 122 Newcastle Estonia 123 Tallinn Finland 124 Helsinki 125 Jyyäskylä 126 Oulu 127 Tampere 128 Turku 129 Vasa 70 EN 28.
i EN 29. CE Mark and EC Declaration of Conformity The electronic roller shutter belt winder RolloTron Comfort (item no.: 1623 45 x9 / 1623 60 19 /1615 45 19) complies with the requirements of the following directives and standards: 2006/42/EC Machinery directive Conformity has been verified. The corresponding declarations and documentation are available on file at the manufacturer’s premises. RADEMACHER Geräte-Elektronik GmbH Buschkamp 7 46414 Rhede (Germany) 2014/30/ EU EMC directive i 30.
EN 31. Warranty conditions RADEMACHER Geräte-Elektronik GmbH provides a 36-month warranty for new systems that have been installed in compliance with the installation instructions. All construction faults, material defects and manufacturing defects are covered by the warranty. Your statutory warranty claims shall remain unaffected by this warranty.