Instructions

29
EN
17.1 Moving to a target position
If necessary, you can enter an arbitrary target position for
your roller shutters which you can then move to directly.
The RolloTron Comfort is able to move to the target position
and stop the roller shutters fully independently and auto-
matically. It is not necessary to give an additional manual
movement or stop command.
Target position
The target position is entered as a percentage and can be
selected in 10% steps using the setting keys [ / ].
0 % = the roller shutters are fully opened.
100 % = the roller shutters are fully closed.
Automatic movement to a target position after ap-
prox. two seconds.
The system will initiate movement to the congured target
position automatically if no button is pressed for approx.
two seconds.
NOTE
The ventilation position is ignored when moving to the
target position.
1.
Display the current position
of the roller shutters.
a) In order to do so, briey
press one of the two set-
ting keys.
b) The current position of
the roller shutters is dis-
played as a percentage.
2.
Enter the desired target po-
sition by repeatedly pressing
the key (e.g. 50%).
3.
The RolloTron Comfort will
automatically move to the
target position and stop
after approx. two seconds.