Instructions

65
EN
23. What to do if... ?
i
Fault Possible cause / solution
... the RolloTron Comfort no longer reacts to manual
commands and a temperature icon is shown on the
display?
The maximum running time of the drive has been exceeded, see page 8.
The motor is too hot. The RolloTron Comfort will be operational again
in approx. 1 hour.
... the RolloTron Comfort no longer reacts to automatic
commands and an error message [ Er02 ] is shown on
the display?
a) The RolloTron Comfort is no longer ready for operation. Carry out
a hardware reset in accordance with page 59.
b) If the error persists after carrying out a hardware reset, dismantle
the RolloTron Comfort and have the device repaired by a
specialist dealer.