Instructions

EN
27
Contents
i
Dear Customer, ..............................................................................................26
These instructions... .......................................................................................26
Key to symbols ..............................................................................................26
Figures .........................................................................................................28
Key to the overall view (Figure ) ................................................................ 29
General safety instructions...............................................................................30
Proper use / operational conditions .................................................................. 30
Incorrect use .................................................................................................30
Functional description ..................................................................................... 31
Function of the fabric relief and blockage detection system ..................................31
Function of the fabric tensioning and obstacle detection system ............................31
Important assembly instructions ....................................................................... 32
Preparing the awning system ...........................................................................32
Mounting / dismounting the adapter (Fig.
2
) * .............................................. 32
Mounting the catch with freewheel mechanism (Figures
3
and
.a
) * ................ 33
Mounting the catch without freewheel mechanism (Fig.
.b
) ............................... 33
Dismounting the catch (Fig.
.c
) .....................................................................33
Slide the tubular motor into the awning shaft (Fig.
4
) ...................................... 34
Preparation for use of precision tubes (Figures
.a
-
.e
) .....................................34
Mounting the roller shutter casing (Fig.
5
-
7
) .............................................. 36
Preparing the awning for the electrical connection and commissioning (Figure
8
)..36
Safety instructions for electrical connection ........................................................37
Safe cable routing by fixing the plug connection .................................................37
The motor cable (Figure k) ..........................................................................38
Electrical connection of the tubular motor (Fig.
l
),
Control of a drive from a single point with a 1-pole switch / button.......................38
Parallel connection of several motors (Fig.
m
)..................................................39
Connection of an external switch (230V/50Hz) (Fig.
n
)
for subsequent adjusting the end point with the set line .......................................39
Use of the set line for manual end point adjustment ............................................40
Connection of a cord circuit setting unit .............................................................40
End point adjustment......................................................................................41
Manual adjustment of end points .....................................................................41
Automatically setting the upper end point and manually setting the
lower end point .............................................................................................42
Manually setting the upper / lower endpoints ....................................................43
Test run / modifying the end points..................................................................43
Configuring tubular motors ..............................................................................44
Loading factory settings during the commissioning process ................................... 44
Fabric tensioning (reversing) after the end point has been reached or
switching on / off after obstacle detection.........................................................44
What to do if... ? ..........................................................................................45
Technical specifications ...................................................................................47
Simplified EU Declaration of Conformity ............................................................47
Warranty conditions .......................................................................................48