Instructions

3737

. . .

1. ... 4.

5. 1. ... 4.

Press the desired device button that you wish to use

later to select the device.

Observe the status LED

Green: The registration was successful.

Orange: The button is already fully allocated.

Repeat points 1 to 4 in order to register the next

device or the next actuator.

ADVICE 1

◆ If a device has several channels (e.g. 2-channel actuator), you

must select a group button for each channel.

◆ In the case of devices with several channels, it will jump auto-

matically to point 3 until all of these channels have been worked

through.

◆ If a channel should not be allocated or should be skipped over,

you must press the stop button.

ADVICE 2

You can also register a device several times, e. g. to realise an

individual control and a group control:

- RolloTron Standard DuoFern 1 on button 1

- RolloTron Standard DuoFern 2 on button 2

- RolloTron Standard DuoFern 3 on button 3

- RolloTron Standard DuoFern 1/2/3 on button 4

Please observe the maximum possible number of devices

per button (see page 35).