Instructions

3939
EN
▲
2.
1.
1 x
3.
4.
Observe the status LED
Green: The registration was successful.
Orange: The button is already fully allocated.
Register DuoFern end devices (applies to item no. 3248 03 61)
Switch the desired DuoFern end device or
DuoFern actuator to registering mode.
(see corresponding operating instructions)
Switch the DuoFern Standard manual transmitter
to registering mode.
In order to do so, briefly press the ”connect” button.
Points 1 and 2 must be repeated for each actuator.