Instructions
Table Of Contents
- 1. Diese Anleitung ...
- 2. Gefahrensymbole
- 2.1 Verwendete Darstellungen und Symbole
- 3. Sicherheitshinweise
- 3.1 Bestimmungsgemäße Verwendung
- 3.2 Nicht bestimmungsgemäßer Gebrauch
- 3.3 Glossar - Begriffserklärung
- 4. Lieferumfang
- 5. Anschlüsse und Taster des HomePilot®
- 5.1 Die Kontrollleuchten des HomePilot®
- 6. Funktionsbeschreibung
- 7. Technische Daten
- 7.1 Systemvoraussetzungen
- 7.2 Hinweise zur Netzwerksicherheit
- 8. Den HomePilot® in Betrieb nehmen
- 8.1 Den Router anschließen
- 8.2 Das Netzteil anschließen
- 9. Die Benutzeroberfläche aufrufen
- 9.1 Navigation und Bedienung
- 9.2 Was tun, wenn der HomePilot® nicht erkannt wird
- 9.3 Softwareupdate
- 10. Was tun, wenn ...
- 11. Vereinfachte EU-Konformitätserklärung
- 12. Garantiebedingungen
- 1. This manual...
- 2. Hazard symbols
- 2.1 Symbols and depictions used
- 3. Safety instructions
- 3.1 Intended use
- 3.2 Improper use
- 3.3 Glossary - definition
- 4. Included in delivery
- 5. HomePilot® connections and buttons
- 5.1 Indicator lights on the HomePilot®
- 6. Functional description
- 7. Technical specifications
- 7.1 System requirements
- 7.2 Information about network security
- 8. Commissioning the HomePilot®
- 8.1 Connecting the router
- 8.2 Connecting the power supply
- 9. Accessing the user interface
- 9.1 Navigation and operation
- 9.2 What can I do if the HomePilot® is not detected
- 9.3 Software update
- 10. What to do if ...
- 11. Simplified EU declaration of conformity
- 12. Warranty terms and conditions
36
EN
i
1) (LAN) Connection to the local network
2) 4 x USB ports (USB 2.0) *
3) DC 5 V / 3 A Power supply connection
4) Reset Reset button **
i
* The USB connections are inactive and cannot be used
for third-party products.
** You can erase all of your settings and return the original
factory settings during a reset.
Disconnect the power supply. Press and hold the reset
button and switch on the power supply again.
Wait until the red LED lights up continuously after flashing
and the green LED is off. The reset is now executed and you
can release the button again.
5. HomePilot® connections and buttons
1) 2) 3) 4)