Instructions
Table Of Contents
- 1. Diese Anleitung ...
- 2. Gefahrensymbole
- 2.1 Verwendete Darstellungen und Symbole
- 3. Sicherheitshinweise
- 3.1 Bestimmungsgemäße Verwendung
- 3.2 Nicht bestimmungsgemäßer Gebrauch
- 3.3 Glossar - Begriffserklärung
- 4. Lieferumfang
- 5. Anschlüsse und Taster des HomePilot®
- 5.1 Die Kontrollleuchten des HomePilot®
- 6. Funktionsbeschreibung
- 7. Technische Daten
- 7.1 Systemvoraussetzungen
- 7.2 Hinweise zur Netzwerksicherheit
- 8. Den HomePilot® in Betrieb nehmen
- 8.1 Den Router anschließen
- 8.2 Das Netzteil anschließen
- 9. Die Benutzeroberfläche aufrufen
- 9.1 Navigation und Bedienung
- 9.2 Was tun, wenn der HomePilot® nicht erkannt wird
- 9.3 Softwareupdate
- 10. Was tun, wenn ...
- 11. Vereinfachte EU-Konformitätserklärung
- 12. Garantiebedingungen
- 1. This manual...
- 2. Hazard symbols
- 2.1 Symbols and depictions used
- 3. Safety instructions
- 3.1 Intended use
- 3.2 Improper use
- 3.3 Glossary - definition
- 4. Included in delivery
- 5. HomePilot® connections and buttons
- 5.1 Indicator lights on the HomePilot®
- 6. Functional description
- 7. Technical specifications
- 7.1 System requirements
- 7.2 Information about network security
- 8. Commissioning the HomePilot®
- 8.1 Connecting the router
- 8.2 Connecting the power supply
- 9. Accessing the user interface
- 9.1 Navigation and operation
- 9.2 What can I do if the HomePilot® is not detected
- 9.3 Software update
- 10. What to do if ...
- 11. Simplified EU declaration of conformity
- 12. Warranty terms and conditions
38
EN
i
6. Functional description
The HomePilot® can be used to log on, set up and configure all
of the devices in a DuoFern network using the HomePilot® Smart
Home app or the user interface via the web browser on a com-
puter. The system can be used at any time to adapt the devices to
individual requirements.
Network port (LAN)
The HomePilot® must be connected to a free LAN port on a router
to be able to use it.
Accessing the user interface in a local network
Once it has been successfully connected, the user interface of the
HomePilot® can be accessed via the app on your mobile end units
or via the web browser on your computer.
The HomePilot® Smart Home app for Android or iOS products is
available from the appropriate app store.
Accessing the user interface using RADEMACHER's
"WR Connect" service.
The user interface of the HomePilot® can also be accessed world-
wide from any web-enabled end unit. It is necessary to register
free of charge and log on to the RADEMACHER server.
i
Some settings (e.g. the configuration of an IP cam-
era) are only possible in the local network.