Instructions
Table Of Contents
- 1. Diese Anleitung...
- 1.1 Anwendung dieser Anleitung
- 2. Gefahrensymbole
- 2.1 Verwendete Darstellungen und Symbole
- 3. Sicherheitshinweise
- 3.1 Bestimmungsgemäße Verwendung
- 3.2 Nicht bestimmungsgemäßer Gebrauch
- 3.3 Glossar - Begriffserklärung
- 4. Lieferumfang
- 5. Anschlüsse und Taster der Bridge
- 5.1 Die Kontrollleuchten der Bridge
- 6. Funktionsbeschreibung
- 7. Technische Daten
- 7.1 Systemvoraussetzungen
- 8. Die Bridge in Betrieb nehmen
- 8.1 Den Router anschließen
- 8.2 Das Netzteil anschließen
- 9. Die Benutzeroberfläche aufrufen
- 9.1 Navigation und Bedienung
- 9.2 Was tun, wenn die Bridge nicht erkannt wird
- 9.3 Softwareupdate
- 10. Was tun, wenn ...
- 11. Vereinfachte EU-Konformitätserklärung
- 12. Garantiebedingungen
- 1. This manual...
- 1.1 How to use this manual
- 2. Hazard symbols
- 2.1 Symbols and depictions used
- 3. Safety instructions
- 3.1 Intended use
- 3.2 Improper use
- 3.3 Glossary - definition
- 4. Included in delivery
- 5. Bridge connections and buttons
- 5.1 Indicator lights on the Bridge
- 6. Functional description
- 7. Technical specifications
- 7.1 System requirements
- 8. Commissioning the Bridge
- 8.1 Connecting the router
- 8.2 Connecting the power supply
- 9. Accessing the user interface
- 9.1 Navigation and operation
- 9.2 What can I do if the Bridge is not detected
- 9.3 Software update
- 10. What to do if ...
- 11. Simplified EU declaration of conformity
- 12. Warranty terms and conditions
34
EN
i
1) DC 5 V / 3 A Power supply connection
2) (LAN) Connection to the local network
3) Reset Reset button *
*
i
You can erase all of your settings and return the
original factory settings during a reset.
Switch off the device by disconnecting the power supply.
Press and hold the reset button and switch on the power
supply again.
Wait until the red LED lights up continuously after flash-
ing and the green LED is off. The reset is now executed
and you can release the button again.
5. Bridge connections and buttons
2) 3) 1)