Instructions
Table Of Contents
- 1. Diese Anleitung...
- 1.1 Anwendung dieser Anleitung
- 2. Gefahrensymbole
- 2.1 Verwendete Darstellungen und Symbole
- 3. Sicherheitshinweise
- 3.1 Bestimmungsgemäße Verwendung
- 3.2 Nicht bestimmungsgemäßer Gebrauch
- 3.3 Glossar - Begriffserklärung
- 4. Lieferumfang
- 5. Anschlüsse und Taster der Bridge
- 5.1 Die Kontrollleuchten der Bridge
- 6. Funktionsbeschreibung
- 7. Technische Daten
- 7.1 Systemvoraussetzungen
- 8. Die Bridge in Betrieb nehmen
- 8.1 Den Router anschließen
- 8.2 Das Netzteil anschließen
- 9. Die Benutzeroberfläche aufrufen
- 9.1 Navigation und Bedienung
- 9.2 Was tun, wenn die Bridge nicht erkannt wird
- 9.3 Softwareupdate
- 10. Was tun, wenn ...
- 11. Vereinfachte EU-Konformitätserklärung
- 12. Garantiebedingungen
- 1. This manual...
- 1.1 How to use this manual
- 2. Hazard symbols
- 2.1 Symbols and depictions used
- 3. Safety instructions
- 3.1 Intended use
- 3.2 Improper use
- 3.3 Glossary - definition
- 4. Included in delivery
- 5. Bridge connections and buttons
- 5.1 Indicator lights on the Bridge
- 6. Functional description
- 7. Technical specifications
- 7.1 System requirements
- 8. Commissioning the Bridge
- 8.1 Connecting the router
- 8.2 Connecting the power supply
- 9. Accessing the user interface
- 9.1 Navigation and operation
- 9.2 What can I do if the Bridge is not detected
- 9.3 Software update
- 10. What to do if ...
- 11. Simplified EU declaration of conformity
- 12. Warranty terms and conditions
36
EN
i
6. Functional description
The Bridge can be used to log on, set up and configure all of the
devices in a DuoFern network using the HomePilot® Smart Home
app or the user interface via the web browser on a computer. The
system can be used at any time to adapt the devices to individual
requirements.
Network port (LAN)
The Bridge must be connected to a free LAN port on a router to
be able to use it.
Accessing the user interface in a local network
Once it has been successfully connected, the user interface of the
Bridge can be accessed via the app on your mobile end units or
via the web browser on your computer.
The HomePilot® Smart Home app for Android or iOS products is
available from the appropriate app store.
Accessing the user interface using RADEMACHER's "WR
Connect" service.
The user interface of the Bridge can also be accessed worldwide
from any web-enabled end unit. It is necessary to register free of
charge and log on to the RADEMACHER server.