Instructions
Table Of Contents
- 1. Diese Anleitung...
- 1.1 Anwendung dieser Anleitung
- 2. Gefahrensymbole
- 2.1 Verwendete Darstellungen und Symbole
- 3. Sicherheitshinweise
- 3.1 Bestimmungsgemäße Verwendung
- 3.2 Nicht bestimmungsgemäßer Gebrauch
- 3.3 Glossar - Begriffserklärung
- 4. Lieferumfang
- 5. Anschlüsse und Taster der Bridge
- 5.1 Die Kontrollleuchten der Bridge
- 6. Funktionsbeschreibung
- 7. Technische Daten
- 7.1 Systemvoraussetzungen
- 8. Die Bridge in Betrieb nehmen
- 8.1 Den Router anschließen
- 8.2 Das Netzteil anschließen
- 9. Die Benutzeroberfläche aufrufen
- 9.1 Navigation und Bedienung
- 9.2 Was tun, wenn die Bridge nicht erkannt wird
- 9.3 Softwareupdate
- 10. Was tun, wenn ...
- 11. Vereinfachte EU-Konformitätserklärung
- 12. Garantiebedingungen
- 1. This manual...
- 1.1 How to use this manual
- 2. Hazard symbols
- 2.1 Symbols and depictions used
- 3. Safety instructions
- 3.1 Intended use
- 3.2 Improper use
- 3.3 Glossary - definition
- 4. Included in delivery
- 5. Bridge connections and buttons
- 5.1 Indicator lights on the Bridge
- 6. Functional description
- 7. Technical specifications
- 7.1 System requirements
- 8. Commissioning the Bridge
- 8.1 Connecting the router
- 8.2 Connecting the power supply
- 9. Accessing the user interface
- 9.1 Navigation and operation
- 9.2 What can I do if the Bridge is not detected
- 9.3 Software update
- 10. What to do if ...
- 11. Simplified EU declaration of conformity
- 12. Warranty terms and conditions
42
EN
8.2 Connecting the power supply
1. Connect the power supply provided to the power input
[ DC 5 V/3 A ] of the Bridge and then plug the power supply into
a free 230 V / 50 Hz mains socket.
2. After switching on the power supply, the LED starts to flash
green and the red LED flashes during the boot process.
3. The Bridge is ready to use once the LED lights up green continu-
ously and the red LED is off.
i