Instructions
Table Of Contents
- 1. Diese Anleitung...
- 1.1 Anwendung dieser Anleitung
- 2. Gefahrensymbole
- 2.1 Verwendete Darstellungen und Symbole
- 3. Sicherheitshinweise
- 3.1 Bestimmungsgemäße Verwendung
- 3.2 Nicht bestimmungsgemäßer Gebrauch
- 3.3 Glossar - Begriffserklärung
- 4. Lieferumfang
- 5. Anschlüsse und Taster der Bridge
- 5.1 Die Kontrollleuchten der Bridge
- 6. Funktionsbeschreibung
- 7. Technische Daten
- 7.1 Systemvoraussetzungen
- 8. Die Bridge in Betrieb nehmen
- 8.1 Den Router anschließen
- 8.2 Das Netzteil anschließen
- 9. Die Benutzeroberfläche aufrufen
- 9.1 Navigation und Bedienung
- 9.2 Was tun, wenn die Bridge nicht erkannt wird
- 9.3 Softwareupdate
- 10. Was tun, wenn ...
- 11. Vereinfachte EU-Konformitätserklärung
- 12. Garantiebedingungen
- 1. This manual...
- 1.1 How to use this manual
- 2. Hazard symbols
- 2.1 Symbols and depictions used
- 3. Safety instructions
- 3.1 Intended use
- 3.2 Improper use
- 3.3 Glossary - definition
- 4. Included in delivery
- 5. Bridge connections and buttons
- 5.1 Indicator lights on the Bridge
- 6. Functional description
- 7. Technical specifications
- 7.1 System requirements
- 8. Commissioning the Bridge
- 8.1 Connecting the router
- 8.2 Connecting the power supply
- 9. Accessing the user interface
- 9.1 Navigation and operation
- 9.2 What can I do if the Bridge is not detected
- 9.3 Software update
- 10. What to do if ...
- 11. Simplified EU declaration of conformity
- 12. Warranty terms and conditions
45
EN
i
9.3 Software update
The Bridge is continually updated through firmware updates. You
can tell whether an update is available by the flashing green LED
or by a red update icon in the HomePilot® Smart Home app or user
interface in the browser.
i
The power supply must not be disconnected during
the software update.
1. Open the app or the user interface in the browser.
2. Select the “Maintenance” menu option and check to see if an
update is available.
3. Start the update (if available). The red and green LEDs flash
during the update. This process may take several minutes.
4. The Bridge is ready to use again once the LED lights up green
continuously and the red LED is off.
i
The entire update process takes approx. 5 minutes
plus the time for the download of the update.