Instructions
Table Of Contents
- 1. This manual...
- 2. Hazard symbols
- 2.1 Symbols and depictions used
- 3. Safety instructions
- 3.1 Intended use
- 3.2 Glossary - definition
- 4. Included in delivery
- 5. General view
- 5.1 Display icons
- 6. Product description
- 7. Technical specifications
- 8. Initial commissioning
- 8.1 Insert the enclosed batteries
- 8.2 Logging on to the HomePilot®
- 8.3 Logging on to the DuoFern Room Thermostat 2
- 8.4 Activating installation mode (POS)
- 8.5 Mounting on the radiator valve
- 8.6 Performing an installation run (InS)
- 9. Settings on the ready-to-use device
- 9.1 Setting the target temperature
- 9.2 Child protection function / operating lock
- 10. Introduction to opening the menus and setting the functions
- 10.1 Automatic function (Aut)
- 10.2 Boost function (boS)
- 10.3 DuoFern menu (duo) Logging on / logging off / clearing
- 10.4 Internal window open detection (dEt)
- 10.5 External window open detection
- 10.6 Internal or external controling (SEn)
- 10.7 Rotating the information on the display (dIS) (180°)
- 10.8 Reception interval (EIn)
- 10.9 Viewing the battery charge level (bAt)
- 10.10 Viewing the current software version (ld)
- 11. Deleting all settings and resetting to the factory settings
- 12. Error messages and troubleshooting
- 13. Cleaning / maintenance
- 14. Simplified EU declaration of conformity
- 15. Information about environmental protection
- 16. Warranty terms and conditions
30
EN
i
16. Warranty terms and conditions
RADEMACHER Geräte-Elektronik GmbH provides a 24-month
warranty for new devices that have been installed in compliance
with the installation instructions. All construction faults, ma-
terial defects and manufacturing defects are covered by the
warranty. Your statutory warranty claims remain unaected
by this warranty.
The following are not covered by the warranty:
◆ Incorrect tting or installation
◆ Non-observance of the installation and operating manual
◆ Improper operation or wear and tear
◆ External inuences, such as impacts, knocks or weathering
◆ Repairs and modications by third parties, unauthorised
persons
◆ Use of unsuitable accessories
◆ Damage caused by unacceptable excess voltages (e.g.
lightning)
◆ Operational malfunctions caused by radio frequency
overlapping and other such radio interference
A prerequisite for the warranty is that the new device must
have been purchased from one of our approved specialist
retailers. Proof of this must be provided by presenting a copy
of the invoice.
RADEMACHER will remedy any defects that occur within the
warranty period free of charge either by repair or replacement
of the aected parts or by supplying a new replacement unit
or one to the same value. There is no general extension of
the original warranty period by delivery of a replacement or
by repair as per the terms of the warranty.