Owner's Manual

PAGE 10
settings tech specs
POI: Deleting all POIs Detector Type
Operating Frequency
Technical Parameters
Threat Display
User Setting Memory
You can select “Del ALL User POI?” in
the Menu to delete all POIs registered in
memory
Dual conversion super-heterodyne
receiver
Linear polarized self-contained antenna
Scanning frequency discriminator
X band: 10.475 - 10.575 GHz
K band wide: 23.950 - 24.250 GHz
K band narrow: 24.080 - 24.200 GHz
Ka band wide: 33.400 - 36.000 GHz
Operating temperature:
-30° to +185° F
Power requirement:
11V-16V DC
200mA Negative ground
Dimensions:
72(W) x 116(L) x 34(H) mm
2.83(W) x 4.75(L) x 1.34(H) in
Weight:
8.2 oz (200g)
If the radar detector detects more than
one signal, the additional received sig-
nal/s will also be displayed when display
setting is set to “THREAT.”
The display will show the three strongest
signals in the following priority (highest
to lowest)
All features selected and configured are
stored in the radar detector’s memory.
If “MUTE ON” is enabled, it will revert
back to “MUTE OFF” (default) after the
radar detector restarts
•
•
1.
1.
2.
1.
2.
•
•
•
•
•
•
•
•