Data Sheet

Radial Smart Sheet
Radial Engineering Ltd. • © Copyright 2021 all rights reserved • www.radialeng.com • email [e-mail] • Subject to change without notice • Made in Canada
EXTC STEREO GUITAR EFFECTS REAMPER
The EXTC Stereo is a creative studio tool that gives you the ability to play any pre-recorded
audio track through stereo guitar e󰀨ects pedals, using the process known as Reamping™ to
utilize your pedal collection in new and exciting ways.
The original single-channel EXTC is a secret weapon of mixing engineers worldwide, used
for adding guitar FX such as distortion pedals onto any audio track. With the EXTC Stereo,
you can also incorporate a lush stereo reverb pedal into your mix, play around with a ping
pong delay on vocals, or even add rotary e󰀨ects for a unique element that helps your mix
stand out from the rest.
Connecting to your recording interface is made easy with both XLR and TRS options
available, along with front-panel jacks for your guitar pedals. Send & Receive level controls
optimize the signal path, while a Blend knob adjusts the wet/dry mix to ne-tune the results.
Features
• Stereo EFX loop to Reamp through any guitar pedals
• Send & Receive controls optimize signal path
• Blend control for precise wet/dry adjustment
• Transformer isolation to eliminate hum and buzz
Applications
• Use with stereo guitar eects on prerecorded tracks
• Take vocals, drums, or strings through eects pedals
for new and unique sonic combinations
• Can also be used for standard Reamping through
guitar ampliers
Extras
• Line-level i/o over both XLR and TRS connectors
• EFX on/o switch for A/B auditioning
• Phase invert to compensate for vintage pedals
• Can be rack-mounted with SA series rack adaptor
SEND & RECEIVE - Adjusts
the signal level going to and
from your e󰀨ects to optimize
the signal-to-noise ratio.
POWER LED - Illuminates to
indicate the EXTC Stereo is
connected to power.
CABLE CLAMP - Secures the power
supply cable in place to prevent
accidental disconnection.
POWER INPUT - Connection
for the included 15V 400mA
power supply.
COMBO INPUTS - Balanced
inputs allow you to connect
XLR or 1/4” TRS line-level
sources to the EXTC Stereo.
XLR LINE OUTPUTS - Balanced
XLR outputs for connection to the
line-level inputs of a recording
interface or mixer.
¼” LINE OUTPUTS - Balanced 1/4” TRS
outputs for connection to the line-level inputs
of a recording interface or mixer..
PHASE INVERT - Used to
compensate for e󰀨ects pedals
that are wired out of phase.
EFX LOOP ON - On/o󰀨 switch
bypasses the unbalanced
EFX loop, allowing you to A/B
audition your e󰀨ects.
BLEND - Controls the wet/
dry mix between output of the
pedals and the original dry
audio tracks.
EFFECTS INSERT -
Unbalanced 1/4” TS
connections for your stereo
e󰀨ects pedal chain.
Order No. R800 1437 00
The EXTC Stereo functions as the link between a
line-level recording interface and your instrument-level
guitar pedals. It converts the audio at each stage to the
proper impedance and signal level, making it easy to
incorporate guitar pedals into your mix without loss of
audio quality or tone.
Once connected, you can feed pre-recorded audio
tracks through any guitar pedal and easily record the
results directly back into your recording software, giving
you the ability to explore your creativity in the studio
while breathing new life into your pedal collection.
Reamping Through Stereo E󰀨ects Pedals
Original ‘Dry’ audio signal
Post-FX ‘Wet’ audio signal
Line Level Instrument Level