User's Manual

IFU-00444 Rev 01 Page 11 of 30
Section 7 - Use
Opening Package and Charging Cirvo Compression Device
Figure 5: Charging. Connect AC Charger onto Cirvo Compression Device (Left) and plug into AC
outlet; light on top of controller (Right) will show charging status.
1. Remove Cirvo Device and AC Charger from packaging. Inspect for any visible physical
damage such as cracked components, sharp edges, loose components, etc.
Do not use the device if the packaging shows signs of damage or exposure to water or
any signs of damage to the Cirvo Compression Device or AC Charger.
2. Plug DC plug into Cirvo Device (Fig. 5) and plug AC Charger into 110V AC outlet.
3. Charge using only the supplied AC Charger – using a standard outlet. Do not attempt
to plug Cirvo Device into a damaged or non-standard outlet.
4. At complete charge (solid green), the Cirvo Device will be ready for use.
5. Tap on the Cirvo App icon to launch the application.
6. Follow instructions as prompted – Figure 6 & 7 (Left Leg) and Figure 8 (Right Leg)
7. Adjust straps as prompted.
Blinking Green: Charging
Solid Green: Fully charged