SPPC SINGLE POLE POWER CONNECTORS SPPC-PWL SPPC-HK SPPC-LJP Power connectors, 400A / 750A Compact power connectors, 250A /400A Lug Joint Protector
SPPC Introduction SPPC-PWL – Single Pole Power Connectors PWL Connectors have become widely adopted in a diverse range of applications and industries. Up to 750A, 1.000V IP67 when mated (according EN 60529) IP2x finger protected contacts Intermatable with any Powerlock and Powerline compliant connectors • KSPC: keyed single pole connector, individual keyways to prevent connection errors • • • • SPPC-HK – Compact Single Pole Power Connectors HOOK Connectors have been developed as a PWL compact series.
SPPC – Single Pole Power Connectors Single Pole Power Connectors have become widely adopted in a diverse range of applications and industries. APPLICATIONS • Power distribution • Utilities • Electric Vehicles • Railway Equipment • Military Field Power • Mobile Generators • Loadbanks • Back-up Power Systems SPPC - PWL Characteristics Key caracteristics 500 Mating Cycles minimum. Intermateable with other versions. IP2X Finger Protected contacts. IP67 sealed when mated.
SPPC - PWL Introduction SPPC – Single Pole Power Connectors Power connectors types: • Source: female connector is the source of the power, it receives and holds the male connector. • Drain: male connectors receives and holds the female connector. The Drain connectors have a pin for the secondary locking (locks into the source connectors) The release key is required to unlock the secondary locking pin. • Inline: source (1) or drain (2) is a moveable connectors fitted to a cable.
Key Position Insulator Color Contact Termination Cable external diameter LS L1 BR C-240 M SPPC - PWL Connector Type SPPC-PWL Modification Number* Series Characteristics Cable/Line Source LS Cable/Line Drain LD Panel Source PS Panel Drain PD Earth E 7mm – 15mm ES Neutral N 15mm – 23mm S Phase 1 L1 19mm – 28mm M Phase 2 L2 22mm – 32mm OS Phase 3 L3 33mm - 37mm OS-M50 Brown BR Black BK Grey GY Blue BU Green GR Red RD Yellow YL White WH M12 post – 750A
SPPC - PWL Product Range PANEL DRAIN CONNECTORS - 750A M12 post for conductor up to 300mm2 Color* Designation Order Number Brown – Phase L1 SPPC-PWL-PD-L1-BR-M12-T7 390110 Black – Phase L2 SPPC-PWL-PD-L2-BK-M12-T7 390111 Grey – Phase L3 SPPC-PWL-PD-L3-GY-M12-T7 390112 Blue – Neutral SPPC-PWL-PD-N-BU-M12-T7 390113 Green – Earth SPPC-PWL-PD-E-GN-M12-T7 390109 Color* Designation Order Number Brown – Phase L1 SPPC-PWL-PD-L1-BR-M12-T4 390070 Black – Phase L2 SPPC-PWL-PD-L2-BK-M12-T4 39
PANEL SOURCE CONNECTORS - 750A M12 post for conductor up to 300mm2 Color* Designation Order Number Brown – Phase L1 SPPC-PWL-PS-L1-BR-M12-T7 390100 Black – Phase L2 SPPC-PWL-PS-L2-BK-M12-T7 390101 Grey – Phase L3 SPPC-PWL-PS-L3-GY-M12-T7 390102 Blue – Neutral SPPC-PWL-PS-N-BU-M12-T7 399000 Green – Earth SPPC-PWL-PS-E-GN-M12-T7 399004 Color* Designation Order Number Brown – Phase L1 SPPC-PWL-PS-L1-BR-M12-T4 390065 Black – Phase L2 SPPC-PWL-PS-L2-BK-M12-T4 390132 Grey – Phase L3 SP
SPPC - PWL Product Range CABLE/LINE DRAIN CONNECTORS - 400A Screws terminal for conductor up to 120mm2 Color* Designation Order Number Brown – Phase L1 SPPC-PWL-LD-L1-BR-S-120-M 390091 Black – Phase L2 SPPC-PWL-LD-L2-BK-S-120-M 390092 Grey – Phase L3 SPPC-PWL-LD-L3-GY-S-120-M 390093 Blue – Neutral SPPC-PWL-LD-N-BU-S-120-M 390090 Green – Earth SPPC-PWL-LD-E-GN-S-120-M 390089 Sleeves included, for cable conductor size 35 mm2 - 50 mm2 - 70 mm2 - 95 mm2 - 120 mm2 CABLE/LINE DRAIN CONNECTORS
CABLE/LINE SOURCE CONNECTORS - 400A Screws terminal for conductor up to 120mm2 Color* Designation Order Number Brown – Phase L1 SPPC-PWL-LS-L1-BR-S-120-M 390086 Black – Phase L2 SPPC-PWL-LS-L2-BK-S-120-M 390087 Grey – Phase L3 SPPC-PWL-LS-L3-GY-S-120-M 390088 Blue – Neutral SPPC-PWL-LS-N-BU-S-120-M 390085 Green – Earth SPPC-PWL-LS-E-GN-S-120-M 390084 SPPC - PWL Characteristics Sleeves included, for cable conductor size 35 mm2 - 50 mm2 - 70 mm2 - 95 mm2 - 120 mm2 CABLE/LINE SOURCE CONNEC
SPPC - PWL Product Range REMOVAL TOOL Type Designation Order Number Screw set termination SPPC-PWL-RT-25-120 390038 Crimp contacts SPPC-PWL-RT-185-300 390039 1 2 3 CRIMPING TOOL Due to the numerous cable types available, it is recommended to contact us to confirm cable and crimp suitability.
PANEL SOURCE CONNECTORS (contacts and panel gasket to be order separately) PANEL DRAIN CONNECTORS Color* Designation Order Number Brown – Phase L1 SPPC-PWL-PS-ISOL-L1-BR 392101 Black – Phase L2 SPPC-PWL-PS-ISOL-L2-BK 392102 Grey – Phase L3 SPPC-PWL-PS-ISOL-L3-GY 392103 Blue – Neutral SPPC-PWL-PS-ISOL-N-BU 392104 Green – Earth SPPC-PWL-PS-ISOL-E-GN 392105 Type Designation Order Number Source - M12 post – 750A SPPC-PWL-PS-CONT-M12-750A 392201 Source - M12 post – 400A SPPC-PWL-PS-CON
SPPC - PWL Product Range INLINE SOURCE CONNECTORS (contacts to be order separately) Color** Designation Order Number Brown – Phase L1 SPPC-PWL-LS-ISOL-L1-BR 392111 Black – Phase L2 SPPC-PWL-LS-ISOL-L2-BK 392112 Grey – Phase L3 SPPC-PWL-LS-ISOL-L3-GY 392113 Blue – Neutral SPPC-PWL-LS-ISOL-N-BU 392114 Green – Earth SPPC-PWL-LS-ISOL-E-GN 392115 Type Designation Order Number Source – Screw up to 35mm2-120mm2 *– 400A SPPC-PWL-LS-CONT-S-400A 392209 Source – Crimp contacts 185 mm2 – 750A
SPPC - PWL Characteristics BIMETALLIC CONNECTORS FOR ALUMINIUM CABLES For crimping tool and crimping die, please consult our commercial office.
SPPC - PWL Product Range BIMETALLIC CONNECTORS FOR ALUMINIUM CABLES For crimping tool and crimping die, please consult our commercial office.
CABLE GLAND FOR INLINE CONNECTORS Type Designation Order Number M40 threaded (19mm-28mm) SPPC-PWL-M40 392301 M40 threaded (22mm-32mm) SPPC-PWL-M40-A 392302 M50 threaded* (33mm-37mm SPPC-PWL-LS-M50 * * To be ordered with inline connectors only ENVIROMENTAL LOCKING CAPS PANEL GASKET SPPC - PWL Characteristics Type Designation Order Number Panel SOURCE SPPC-PWL-PS-CAP 392304 Panel DRAIN SPPC-PWL-PD-CAP 392305 Inline SOURCE SPPC-PWL-LS-CAP 392306 Inline DRAIN SPPC-PWL-LD-CAP 39230
SPPC - PWL Product Range Derating data for 85°C rubber insulated cables.
SPPC – Single Pole Power Connectors – up to 400A HLock series offers new opportunities of using the electrical connection even in applications where in the past this was not possible due to low cost requirements and without renouncing to a complete range of features concerning robustness, reliability and safety.
SPPC - HK Introduction SPPC – Single Pole Power Connectors Power connectors types: • Source: female connector is the source of the power, it receives and holds the male connector. • Drain: male connectors receives and holds the female connector. The Drain connectors have a pin for the secondary locking (locks into the source connectors) The release key is required to unlock the secondary locking pin. • Inline: source (1) or drain (2) is a moveable connectors fitted to a cable.
VANTEN mating system: a faster and more reliable connection • Position major key alignment arrows • Firmly push the male and female connectors together • Rotate the male and female connectors in opposite direction until the padlock symbol is in alignment with the arrow symbol • Release the connectors and they spring into the locked position.
SPPC - HK Introduction SPPC – Single Pole Power Connectors Unwanted uncoupling prevention: a simple trap makes the system safer. The connectors can only be separated by removing it with a suitable tool. Contact Removal The contacts are inserted from the rear and snap into position within the insulator with no requirements for any cotter/dowel pin or assembly tool. The contacts are removed from the insulator by using a simple tool to release the retaining clip.
Key Position Insulator Color Contact Termination Cable external diameter LS L1 BR C-120 M Cable/Line Source LS Cable/Line Drain LD Panel Source PS Panel Drain PD Earth E Neutral N Phase 1 L1 Phase 2 L2 Phase 3 L3 Brown BR Black BK Grey GY Blue BU Green GR Red RD Yellow YL White WH M12 post – 250A up to 70mm2 M12-T2 M12 post – 400A up to 120mm2 M12-T4 Screw terminal – 250A up to 70mm2* S-70 Crimp contacts – 400A 95mm2- 120mm2 C-120 SPPC - HK Connector Type
SPPC - HK Product Range PANEL SOURCE CONNECTORS - 250A M12 post for conductor up to 70mm2 Color* Designation Order Number Brown – Phase L1 SPPC-HK-PS-L1-BR-M12-T2 440004 Black – Phase L2 SPPC-HK-PS-L2-BK-M12-T2 440017 Grey – Phase L3 SPPC-HK-PS-L3-GY-M12-T2 440071 Blue – Neutral SPPC-HK-PS-N-BU-M12-T2 440072 Green – Earth SPPC-HK-PS-E-GN-M12-T2 440018 Color* Designation Order Number Brown – Phase L1 SPPC-HK-PS-L1-BR-M12-T4 440033 Black – Phase L2 SPPC-HK-PS-L2-BK-M12-T4 440034 Gr
CABLE/LINE DRAIN CONNECTORS - 250A Screws terminal for conductor up to 70mm2 Color* Designation Order Number Brown – Phase L1 SPPC-HK-LD-L1-BR-S-70-M 440002 Black – Phase L2 SPPC-HK-LD-L2-BK-S-70-M 440054 Grey – Phase L3 SPPC-HK-LD-L3-GY-S-70-M 440073 Blue – Neutral SPPC-HK-LD-N-BU-S-70-M 440074 Green – Earth SPPC-HK-LD-E-GN-S-70-M 440036 SPPC - HK Characteristics Sleeves included, for cable conductor size 16mm2 - 25mm2 - 35mm2 - 50mm2 - 70mm2 CABLE/LINE DRAIN CONNECTORS – 400A Crimp co
SPPC - HK Product Range REMOVAL TOOL Type Designation Order Number Crimp and Screw contacts SPPC-HK-RT 750070 CRIMPING TOOL Due to the numerous cable types available, it is recommended to contact us to confirm cable and crimp suitability.
CABLE GLAND FOR INLINE CONNECTORS Type Designation Order Number M32 threaded 7mm – 15mm SPPC-HK-M32-S 750061 M32 threaded 11mm-21mm SPPC-HK-M32-M 750060 M32 threaded 15mm-25mm SPPC-HK-M32-OS * SPPC - HK Characteristics * On request PANEL GASKET Type Designation Neoprene Gaskets SPPC-HK-PG Order Number SLEEVE FOR SCREW CONTACTS Type Designation Order Number Sleeve** SPPC-HK-SLEEVE 750063 ** Sleeves for cable conductor size 16mm2 - 25mm2 - 35mm2 - 50mm2 - 70mm2 23
SPPC - HK Product Range Derating data for 85°C rubber insulated cables.
LUG-IT - Power cable joining system Lugit is a safe and efficient means to make temporary connection / extensions of single core power cables that are pre-terminated with copper lug terminals.
SPPC - LJP Product Range LUG-IT 300 Lock the central locking ring using the remote release key.
LUG-IT 120 Lock the central locking ring using the remote release key.
SPPC - LJP Product Range LUG-IT 300 Accepts cables 185mm², 240mm² and 300mm², for lugs with 12mm holes, Lug Palm Width 45mm max, Bolt Hole 12mm, External Cable Ø 20mm – 32mm. Designation Order Number SPPC-LJP-300 354801 LUG-IT 120 Accepts cable 35mm2 up to 120mm2, for lugs with 8,2mm holes, Lug Palm Width 30mm max, Bolt Hole 10mm or 12mm, External Cable Ø 16mm – 23mm.
Safety SAFETY Information regarding the use of the product within recommended safety limits To use the connectors described in this catalogue according to the necessary safety requirements we suggest you apply the following criteria: • use the connectors and connected cables within their electrical and environmental limits • follow the characteristics of each version (shell, class and type of strain relief) and carefully choose the appropriate connector for the required use • make sure to respect the proced
www.radiall.com France Radiall S.A. Tel. +33 (0) 1 49 35 35 35 info@radiall.com www.vansystem.eu Italy Radiall VanSystem Srl Tel. +39 02 3569931 info.vansystem@radiall.com 050.SPPC003 ed.
