Datasheet

SPPC - HK
SPPC – Single Pole Power Connectors
18
Introduction
Contact Removal
The contacts are inserted from the rear and snap into position within the insulator with no requirements for
any cotter/dowel pin or assembly tool.
The contacts are removed from the insulator by using a simple tool to release the retaining clip.
• Improved mechanical insulator strength
• Reliable sealing
• Improved electrical integrity of the insulator
• Reduced assembly times
• The contacts can be removed and replaced
No replacement parts (cotter/dowel pins) are required.
Unwanted uncoupling prevention: a simple trap makes the system safer.
The connectors can only be separated by removing it with a suitable tool.