Datasheet

SAFETY
Information regarding the use of the product within recommended safety limits
To use the connectors described in this catalogue according to the necessary safety
requirements we suggest you apply the following criteria:
• use the connectors and connected cables within their electrical and environmental limits
• follow the characteristics of each version (shell, class and type of strain relief) and carefully
choose the appropriate connector for the required use
• make sure to respect the procedures regarding the correct assembly of connectors and the
crimping of contacts
• any connector damaged during shipment, storage, assembly or use should be replaced
• never uncouple the connectors when under power
• always protect the parts against shock when the circuit is under power
• always check the circuit before putting it under power
• consult Radiall VanSystem Srl if in doubt
• the user must take final responsibility for electrical safety Radiall VanSystem Srl reserves
the right to amend the specifications of this catalogue without issuing prior notice.
For the instructions concerning assembly and crimping of contacts please consult the
appropriate tools manuals.
We recommend to respect the following general rules:
• to be used always the tools recommended by Radiall VanSystem’s catalogue or manuals
• to be applied the suggested norms for tool maintenance and calibration
DO NOT USE ALTERNATIVE GREASES OR OILS which could damage the insert and affect the
functionality of the connector.
Radiall VanSystem Srl reserves the right to amend the specifications of this catalogue
without issuing prior notice.
Safety