Reusable Tag Model 110A User Guide
Information in this manual is subject to change without notice. Companies, names, and data used in examples herein are fictitious unless otherwise noted. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express permission of Radianse, Inc. Radianse is a registered trademark of Radianse, Inc. Other product and corporate names may be trademarks or registered trademarks of other companies.
..... Contents ................................... Chapter 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Chapter 2 Activating the Reusable Tag. . . . . . . . . . . . . . . . Activating and Installing ID-Tags. . . . . . . . . . . . . 3 3 Chapter 3 Maintaining ID-Tags. . . . . . . . . . . . . . . . . . . . . . 5 Assigning ID-Tags to Patients. . . . . . . . . . . . . . . . 5 Assigning ID-Tags to Equipment . . . . . . . . . . . . 15 439 South Union St.
39 South Union St.
1 I NTRODUCTION I ..... ................................... n a hospital, you need to find patients quickly. With a Radianse Indoor Positioning System (IPS), you can. This book, which includes the following, is for those who want to locate equipment and patients and support staff members more quickly using the Radianse IPS system and the reusable ID-tag Model 110A. • Chapter 1, Introduction, describes the reusable ID-tag Model 110A hardware.
INTRODUCTION 1 439 South Union St.
A CTIVATING THE R EUSABLE T AG T ..... ................................... 2 o use the Radianse IPS reusable tag, you must first activate the tag. .......................................................... ACTIVATING AND INSTALLING ID-TAGS To activate a reusable ID-tag, or make the ID-tag ready for first use, you use the two buttons on the tag as follows: To acti vate a reusabl e I D-ta g Step 1 Hold down button #1 on the front of the tag.
A C T I V A T I N G T H E R E U S A B L E TA G Activating and Installing ID-Tags 2 To a t t a ch a r eu sa bl e I D -ta g • • You attach a reusable ID-tag to a person’s apparel using a clip. You attach a reusable ID-tag to equipment using adhesive as follows: 1 Find a flat area on the piece of equipment that is protected from being hit or bumped. 2 Clean the area with alcohol and let dry. 3 Apply the tag with the adhesive using firm direct pressure for 10 seconds.
M AINTAINING ID-T AGS Y ..... ................................... 3 ou assign ID-tags to patients you want to track with the Radianse Indoor Positioning System. When a resource no longer needs to be tracked, you unassign the related ID-tag. .......................................................... ASSIGNING ID-TAGS TO PATIENTS You assign ID-tags to patients so you can use the Radianse system to locate them.
M A I N T A I N I N G I D - TA G S Assigning ID-Tags to Patients 3 Step 2 Enter your Radianse username and password, and click Login. You see the Assign Equipment page. Step 3 Click Assign Person. Step 3 439 South Union St.
Assigning ID-Tags to Patients You see the Assign Person window. Step 4 Enter the following information for the ID-tag you want to assign: • Last 4 digits of Transmitter Serial Number • First Name • Last Name Step 4 439 South Union St., Suite 403, Lawrence, Massachusetts 01843 978-975-4702 Radianse Reusable Tag Model 110A User Guide 7 .....
M A I N T A I N I N G I D - TA G S Assigning ID-Tags to Patients 3 Step 5 From the Category drop-down, choose Patient. Step 5 439 South Union St.
Assigning ID-Tags to Patients Step 6 ..... M A I N T A I N I N G I D - TA G S Choose from any additional drop-downs displayed, and enter other information requested, for example, Patient Type, or Medical Record Number.Click Assign. Step 6 439 South Union St.
M A I N T A I N I N G I D - TA G S Assigning ID-Tags to Patients 3 You see the information now associated with the transmitter you successfully assigned. Note: You can click Assign Another Transmitter to begin assigning another ID-tag, or you can click Logout to exit the program. 439 South Union St.
Assigning ID-Tags to Patients To una ssi gn an ID-tag from a pati ent You can unassign an ID-tag from a patient as follows: Step 1 From the Assign Person page, click Unassign Person. Step 1 439 South Union St., Suite 403, Lawrence, Massachusetts 01843 978-975-4702 Radianse Reusable Tag Model 110A User Guide 11 .....
M A I N T A I N I N G I D - TA G S Assigning ID-Tags to Patients 3 You see the Unassign Person page. Step 2 Last 4 digits or Last Name + Category Step 3 Step 2 Enter the last 4 digits of the serial number of the ID-tag (transmitter) you want to unassign, - OR Enter the last name of the person whose ID-tag you want to unassign, and from the category dropdown, choose the correct category. Step 3 Click Unassign. 439 South Union St.
Assigning ID-Tags to Patients You see the Unassign Confirmation page. Step 4 Step 5 Step 4 Check the box beside the user whose ID-tag you want to unassign. Step 5 Click Unassign. You see a confirmation that the transmitter assignment has been successfully removed. 439 South Union St., Suite 403, Lawrence, Massachusetts 01843 978-975-4702 Radianse Reusable Tag Model 110A User Guide 13 .....
M A I N T A I N I N G I D - TA G S Assigning ID-Tags to Patients 3 Note: You can click Remove Assignment of Another Transmitter to begin unassigning another ID-tag, or you can click Logout to exit the program. 439 South Union St.
Assigning ID-Tags to Equipment ..... M A I N T A I N I N G I D - TA G S .......................................................... ASSIGNING ID-TAGS TO EQUIPMENT You assign ID-tags to equipment so you can use the Radianse system to locate the equipment. To as si gn ID-tags to equi p ment You can assign ID-tags to equipment as follows: Step 1 From the Radianse Find/Assign Home, click Assign. Step 1 You see the Radianse Login page. Step 2 Enter your Radianse username and password, and click Login.
M A I N T A I N I N G I D - TA G S Assigning ID-Tags to Equipment 3 Step 3 Enter the following in their respective text boxes: • Last 4 digits of the ID-tag Serial Number • Asset Serial Number Step 4 From the Equipment Type drop-down, select the Equipment Type. Step 5 Choose or enter any additional search options you want. Steps 3 and 4 Step 6 Step 6 Click Assign. You see a confirmation that the ID-tag has been successfully assigned. 439 South Union St.
Assigning ID-Tags to Equipment ..... M A I N T A I N I N G I D - TA G S Note: You can click Assign Another ID-tag to begin assigning another ID-tag, or you can click Logout to exit the program. 439 South Union St.
M A I N T A I N I N G I D - TA G S Assigning ID-Tags to Equipment 3 To u na ssi g n ID- t a g s fr o m eq u ip me n t Step 1 From the Assign Equipment page, click Unassign Equipment. Step 1 439 South Union St.
Assigning ID-Tags to Equipment ..... M A I N T A I N I N G I D - TA G S You see the Unassign Equipment page. Step 2 Enter last 4 digits of ID-tag serial number - OR Enter equipment serial number Step 3 Step 2 Enter the last 4 digits of the Transmitter Serial Number or enter the Equipment Serial Number. Step 3 Click Unassign. You see the Unassign Confirmation page. 439 South Union St.
M A I N T A I N I N G I D - TA G S Assigning ID-Tags to Equipment 3 Step 4 Check the box beside the item with the ID-tag you want to unassign. Step 5 Click Unassign. Step 4 Step 5 439 South Union St.
Assigning ID-Tags to Equipment ..... M A I N T A I N I N G I D - TA G S You see the message confirming removal of the assignment. Note: You can click Remove Assignment of Another ID-tag to begin unassigning another ID-tag, or you can click Logout to exit the program. 439 South Union St.
M A I N T A I N I N G I D - TA G S Assigning ID-Tags to Equipment 3 439 South Union St.
