User's Manual

RB8762 Designer’s Guide_draft v04 13
Operating RB8762MB
Introduction - Radicom provides RB8762MB Development Kit to provide a quick platform
for testing and evaluating the RB8762HM Bluetooth module. Each RB8762MB has an USB
connector for providing power and also for UART interface. Through this USB-UART
interface you can issue AT commands to instruct the modules to establish a Bluetooth
connection to transmit and receive data.
Hardware Set-up - To provide power to the RB8762MB, plug one end of the USB cable
into USB connector on the RB8762MB. Plus the other end into the PC USB port.
PC Set-up - Turn on the PC. To send the AT commands and transmit & receive data with the
RB8762MB use a serial communication package such as HyperTerminal. Set the appropriate
COM port for each side with the DTE speed set to 115200 and parity set to 8N1.
Step 1: Hyper terminal setting is as follows:
Step 2: Choose the appropriate COM port.